Pool water chemistry involves maintaining proper levels of chlorine (1-3ppm based on CYA), pH (7.4-7.6), alkalinity (60-120ppm), and calcium hardness (250-350ppm for plaster). Regular testing with quality kits and proper chemical dosing ensures safe, clear water.
The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Wait 24-48 hours after shocking your pool before adding algaecide, allowing chlorine levels to drop below 5 ppm. Test your water first to ensure proper chemical balance and maximum algaecide effectiveness.
Pool filters come in three main types: sand filters (low maintenance, 5-7 year lifespan), cartridge filters (easy cleaning, 1-2 year replacement), and DE filters (finest filtration, requires backwashing every 4-6 weeks).
To fix low stabilizer, add cyanuric acid at 1 pound per 10,000 gallons to raise CYA by 10ppm. For high levels over 80ppm, partially drain and refill your pool, as there's no chemical way to lower stabilizer.
Pool winterization involves balancing chemicals, protecting equipment, and proper closing procedures. The process varies by climate zone but typically includes shocking, lowering water levels, and winterizing plumbing to prevent freeze damage.
Yes, most pool owners need pH Up and pH Down chemicals to maintain the ideal pH range of 7.4-7.6, but you may not need both products depending on your water's natural tendencies.
Salt water pools use electrolysis to generate chlorine from dissolved salt, requiring proper water chemistry balance including pH, alkalinity, and CYA levels. They still need regular maintenance and chemical adjustments despite producing their own chlorine.
Most pools don't need algaecide if you maintain proper chlorine levels (2-5ppm FC) and adequate CYA (30-50ppm). Algaecide is mainly useful for prevention during high-risk periods or as backup insurance, not for treating active algae blooms.
Yes, you can use pool pH increaser in your spa since both use sodium carbonate (soda ash) as the active ingredient. However, you'll need to adjust dosing for your spa's smaller volume and retest after 30 minutes.
To raise pool pH, add sodium carbonate (soda ash) for quick increases or sodium bicarbonate (baking soda) for gradual increases. Test first, calculate dosage based on pool size, and add chemicals slowly with circulation running.
It appears you may have asked about airline miles by mistake when looking for pool maintenance help. This comprehensive guide covers common pool issues and maintenance procedures to get your pool water crystal clear and properly balanced.
Add sodium bicarbonate (baking soda) to increase pool alkalinity - use 1.5 lbs per 10,000 gallons to raise alkalinity by 10 ppm. Test first, add slowly, and retest after 6 hours.
Yes, saltwater pools absolutely need cyanuric acid (stabilizer) to protect the chlorine generated by the salt cell from UV degradation. Maintain CYA levels between 70-80 ppm for optimal protection.
Most pools don't need phosphate remover if you maintain proper chlorine levels. Only consider phosphate removal if you have persistent algae problems despite balanced water chemistry and proper sanitizer levels.
