Pool water chemistry involves maintaining proper levels of chlorine (1-3ppm based on CYA), pH (7.4-7.6), alkalinity (60-120ppm), and calcium hardness (250-350ppm for plaster). Regular testing with quality kits and proper chemical dosing ensures safe, clear water.
The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Wait 24-48 hours after shocking your pool before adding algaecide, allowing chlorine levels to drop below 5 ppm. Test your water first to ensure proper chemical balance and maximum algaecide effectiveness.
Above ground pools require proper installation on level ground, regular liner maintenance (lasting 6-10 years), and balanced water chemistry with chlorine levels based on CYA. This comprehensive guide covers everything from DIY installation to winterization and troubleshooting common issues.
Pool opening involves removing winter covers, inspecting equipment, reconnecting plumbing, and balancing water chemistry. Start with equipment inspection, fill and reconnect systems, then shock and balance chemicals before swimming.
Pool winterization involves balancing chemicals, protecting equipment, and proper closing procedures. The process varies by climate zone but typically includes shocking, lowering water levels, and winterizing plumbing to prevent freeze damage.
Salt water pools use electrolysis to generate chlorine from dissolved salt, requiring proper water chemistry balance including pH, alkalinity, and CYA levels. They still need regular maintenance and chemical adjustments despite producing their own chlorine.
Most pools don't need algaecide if you maintain proper chlorine levels (2-5ppm FC) and adequate CYA (30-50ppm). Algaecide is mainly useful for prevention during high-risk periods or as backup insurance, not for treating active algae blooms.
Most Texas pools operate 8-10 months per year (March through November) due to the warm climate. With proper heating systems, many pools can stay open year-round in most Texas regions.
It appears you may have asked about airline miles by mistake when looking for pool maintenance help. This comprehensive guide covers common pool issues and maintenance procedures to get your pool water crystal clear and properly balanced.
Pool chemical shelf life varies dramatically: liquid chlorine lasts 2-5 years, granular chlorine 2-3 years, while pH adjusters and alkalinity increasers can last indefinitely when stored properly.
Above ground pool liners typically last 6-10 years, with premium vinyl liners potentially lasting up to 15 years. Proper water chemistry, UV protection, and maintenance significantly extend liner life.
A properly winterized pool can stay closed for 6-8 months safely, while emergency closures should be limited to 2-4 weeks maximum. Beyond these timeframes, water chemistry deterioration and equipment damage risks increase significantly.
You can vacuum your pool after adding most chemicals, but timing matters. Wait 15-30 minutes for liquid chemicals to circulate, and 2-4 hours for granular chemicals to fully dissolve before vacuuming.
Pool algae can cause skin rashes, irritation, and other health issues through direct contact or by creating conditions that harbor harmful bacteria. The key is eliminating algae through proper SLAM treatment and maintaining balanced water chemistry.
