The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Above ground pools require proper installation on level ground, regular liner maintenance (lasting 6-10 years), and balanced water chemistry with chlorine levels based on CYA. This comprehensive guide covers everything from DIY installation to winterization and troubleshooting common issues.
Pool opening involves removing winter covers, inspecting equipment, reconnecting plumbing, and balancing water chemistry. Start with equipment inspection, fill and reconnect systems, then shock and balance chemicals before swimming.
Pool leaks can occur in the shell, plumbing, or equipment and are detected using bucket tests, dye tests, and pressure testing. Most minor leaks can be DIY repaired, but structural damage requires professional assessment.
Pool winterization involves balancing chemicals, protecting equipment, and proper closing procedures. The process varies by climate zone but typically includes shocking, lowering water levels, and winterizing plumbing to prevent freeze damage.
Pool heaters can fail due to electrical issues, gas problems, water flow restrictions, or component failures. Most common issues like pilot light problems, low water flow, and thermostat malfunctions can be diagnosed and often fixed without professional help.
Pool pumps require regular maintenance and troubleshooting to operate efficiently. Common issues include low water flow, unusual noises, and electrical problems that can often be resolved with proper diagnosis and maintenance.
A properly winterized pool can stay closed for 6-8 months safely, while emergency closures should be limited to 2-4 weeks maximum. Beyond these timeframes, water chemistry deterioration and equipment damage risks increase significantly.
Yes, you should cover your pool heater in winter if it's not being used, especially for heat pumps and electric heaters. Gas heaters typically need less protection but benefit from covers in harsh climates.
Yes, you absolutely need proper alkalinity in your pool water. Alkalinity acts as a pH buffer, preventing rapid pH swings and maintaining water balance for swimmer comfort and equipment protection.
Inground pool costs range from $35,000-$100,000+ depending on size, materials, and features. Concrete pools are most expensive ($50,000-$100,000), vinyl liner pools are mid-range ($35,000-$65,000), and fiberglass pools fall in between ($40,000-$85,000).
Yes, you absolutely need to winterize your pool heater if temperatures drop below 40°F in your area. Failing to properly winterize can cause expensive freeze damage to internal components and plumbing lines.
You can close a green pool, but it's not recommended as algae will worsen over winter. Either treat the algae with SLAM method before closing, or use extra winterizing chemicals and accept potential spring cleanup issues.
Inground pool liners typically last 10-15 years with proper care, though high-quality vinyl liners can extend to 20 years. Lifespan depends on water chemistry balance, sun exposure, and maintenance practices.
Above ground pool liners typically last 15-20 years, but harsh winter conditions can reduce this lifespan by 2-3 years if not properly winterized. Proper water level maintenance, chemical balance, and cover protection are essential for winter liner preservation.
