Results for "pump replacement"

Water Chemistry Medium 2-4 days for complete dissolution 377 👍 0

How to Dissolve Pool Stabilizer (CYA) - Complete Guide

Around $800 worth of granular cyanuric acid is just sitting on my pool bottom — would my warranty cover this stabilizer dissolution mess before I drain 20,000 gallons? I have a 20,000 gallon inground pool and my current CYA reading is around 15 ppm - I need to get it up to about 50 ppm. I tried just broadcasting the granules directly into the pool like I do with other chemicals, but they seem to just sink to the bottom and sit there without dissolving much.

I've heard that cyanuric acid is notoriously slow to dissolve compared to other pool chemicals. What's the most effective method to get this stuff into solution? Should I be pre-dissolving it somehow, or is there a specific technique that works better? I want to make sure I'm doing this right and not wasting product or creating hot spots in my pool.…more

Read answer

Pump Problems Medium Professional installation required 281 👍 0

Can You Run a Pool Pump on Extension Cord? Safety Guide

After planning our pool party for this Saturday, I discovered my pump outlet is nowhere near the pool equipment pad and I'm scrambling for solutions. The pool store wants me to hire an electrician to install a dedicated circuit for my new pump, but they're quoting me over $800 just for the electrical work. That's on top of what I already spent on the pump itself!

Can I just run a heavy-duty extension cord from my garage outlet to save some money? I've got a 12-gauge outdoor cord that should handle the load. I'm trying to avoid another expensive "professional installation" if I can help it - seems like everything pool-related has to be done by a specialist these days.…more

Read answer

Water Chemistry Medium 2-3 days 271 👍 0

How to Fix Pool Stabilizer Level: Complete CYA Guide

Nobody warned me I'd walk out this morning to find my pool showing a 28 ppm CYA reading that has me completely baffled about what to do next.

For low stabilizer situations, what's the exact amount of cyanuric acid needed per gallon of pool water to achieve specific ppm increases? Additionally, I've read that high CYA levels present different challenges - what are the recommended approaches when levels exceed acceptable thresholds? I need reliable technical guidance for both scenarios to maintain proper water chemistry balance.…more

Read answer

Product Ranking 8 compared

Best Variable Speed Pool Pumps

4.5 (12,400 reviews)

Salt Water Medium 8-24 hours 240 👍 0

Should I Turn Off Salt Cell When Shocking Pool? Expert Guide

Staring at my salt cell wondering if I need to turn it off before shocking my pool — can't afford a $200 service call right now.

Should the salt chlorine generator be turned off while administering shock treatment, or can it continue running?

I want to ensure I'm following correct procedures to avoid any potential equipment damage or interference with the shock's effectiveness. What's the standard protocol for salt cell operation during chemical shock applications?…more

Read answer

Above Ground Easy 15 minutes 236 👍 0

How Long Do Above Ground Pools Last? Lifespan Guide 2024

Every YouTube video promised their above ground pool would last 20+ years, but now I'm drowning in conflicting lifespan advice and more confused than ever. I've been looking at steel, aluminum, and resin options and they're all pretty different price-wise.

Before I commit, I'd love to know how long each type typically lasts? Like, are we talking a few years or more like a decade? And does the material really make that big of a difference, or is it more about how well you take care of it? Don't want to cheap out now and regret it later when I'm dealing with rust or cracks!…more

Read answer

Filters Medium 2-3 hours 223 👍 0

Pool Filter Balls vs Sand: Complete Replacement Guide

Noticed my pool filter isn't performing like it used to — can't afford professional service right now, so is switching from sand to filter balls a DIY job under $100? The pool store mentioned they might work better than traditional sand, but I want to make sure before I make the switch.

Are filter balls actually a good replacement for sand in my filter system? I'm curious about things like how well they filter compared to sand, if they're easier to work with, and whether the maintenance routine changes at all. Any guidance would be really helpful!…more

Read answer

Maintenance Medium varies by closure type 218 👍 0

How Long Can a Pool Stay Closed? Duration & Safety Limits

Between the winter thaw and spring opening every year, I'm left wondering if my pool's been closed too long and the water is now unsafe. My facility requires extended closure periods for various operational reasons, and I want to establish clear protocols for both planned seasonal shutdowns and emergency closures.

Specifically, I'm looking for data on maximum safe closure timeframes before water chemistry becomes unmanageable and equipment integrity is compromised. What are the industry standards for winterized pools versus temporary emergency closures?…more

Read answer

Salt Water Medium 10 minutes 201 👍 0

How Pool Salt Cells Work: Electrolysis Process Explained

I tried figuring out how my neighbor's salt cell creates perfect chlorinated water while mine struggles, but I'm completely lost on how salt actually becomes chlorine.
Like, I get that I add salt to the pool and somehow it becomes chlorine, but what's the actual process happening in there?

Is it some kind of chemical reaction or what? And why does my pH always seem to creep up when the salt cell is running - is that related to whatever's going on inside the cell too?…more

Read answer

Pump Problems Easy 15 minutes 200 👍 0

Can You Run Pool Pump Without Filter? Risks & Solutions

Somewhere between my husband questioning why our pool pump is running without a filter cartridge and my growing panic, I'm wondering if I'm actually damaging something. My filter cartridge is completely clogged and I need to replace it, but my kids are asking to swim this afternoon. I'm wondering if I can just run the pump without any filter for a few hours until I can get to the pool store.

I know this probably isn't ideal, but would it cause any serious damage to the pump or create unsafe water conditions? I don't want to risk my children's safety, but I also don't want to damage our equipment if there's a way to manage this temporarily.…more

Read answer

Filters Medium 4-6 hours 193 👍 0

Can You Shock Pool Without Running Filter? Safe Method

Spent years shocking my old above-ground pool without running the filter and it worked perfectly, but now I'm questioning if it's actually safe for this new setup. I need to shock my pool but I'm wondering if I absolutely have to have the filter system running while I do it? The pool store mentioned something about circulation being important, but they weren't super clear about whether that meant the filter specifically or just water movement in general.

I'm trying to figure out if there's a safe way to shock the pool even if my filter isn't running - maybe by brushing or using the return jets? Any guidance would be really appreciated since I don't want to mess this up!…more

Read answer

Water Chemistry Medium 4-6 hours 166 👍 0

Can I Shock Pool After Adding Baking Soda? Complete Guide

Noticed my neighbor's pool stays crystal clear when he adds baking soda then shocks immediately, but mine turns cloudy every time — what's his secret? I added baking soda to raise my alkalinity this morning, but now I'm wondering about timing.

Can I go ahead and shock the pool right away, or do I need to wait? I don't want to waste the shock treatment or mess up my water chemistry. The pool store guy mentioned something about waiting but then tried to upsell me on their "premium" shock system. Just looking for straight answers on proper timing and whether I should test anything specific before shocking.…more

Read answer

Product Ranking 8 compared

Best Pool Filters

4.5 (15,600 reviews)

Heaters Medium 2-4 hours for protective measures 162 👍 0

Can Pool Heaters Get Wet? Complete Weatherproofing Guide

Somewhere between last week's torrential downpour and watching my kids cannon-ball into the pool nonstop, I started panicking about whether our new heater is actually waterproof. We had it installed last month, but I'm concerned about whether it can handle direct rain, sprinkler overspray, and the humid conditions around our pool area.

Should I be covering it during storms? I want to make sure it stays safe and keeps working properly so the water temperature is always comfortable for the kids. What kind of protection does it actually need from water exposure?…more

Read answer

Above Ground Medium 30-45 minutes 161 👍 0

Can You Clean Pool Liner with Bleach? Safe Methods & Tips

Halfway through cleaning my new vinyl liner with the same bleach method that worked perfectly on my old above-ground pool, I'm wondering if I'm damaging it. They always push these expensive chemicals and act like regular household products will destroy my pool. I've got some stains and algae buildup on my vinyl liner that need attention, and I'm wondering if I can just use regular bleach to clean it.

I know bleach is basically chlorine, which is already in my pool, but I want to make sure I won't damage the liner if I use it directly. Has anyone successfully cleaned their pool liner with household bleach? If so, do I need to dilute it or can I use it straight from the bottle? Looking for some honest DIY advice from people who aren't trying to upsell me!…more

Read answer

Salt Water Medium 2 hours including testing and adjustment 159 👍 0

Do Saltwater Pools Need Cyanuric Acid? Essential Guide

My saltwater pool opens every spring with the same nagging question about whether I actually need cyanuric acid or not. I know the salt cell generates chlorine automatically, but I'm not sure if that means I can skip the stabilizer. My pool gets tons of sun exposure throughout the day.

What's the ideal CYA level for saltwater pools, and does it work differently than regular chlorine pools? Don't want to waste money on chemicals I don't need, but also don't want my chlorine getting zapped by UV rays!…more

Read answer

Filters Easy 10 minutes 158 👍 0

How to Backwash Pool Filter - Complete Step-by-Step Guide

Apparently my pool filter started shooting dirty water back into the pool during what I thought was a normal backwash cycle yesterday.

The pool store told me I need to backwash my filter regularly, but I'm honestly not sure what that means or how to do it properly.

I see there's a multiport valve on my filter system with different settings like BACKWASH, RINSE, and FILTER, but I don't want to mess anything up by doing it wrong. Can someone walk me through the exact steps? Like do I turn the pump off first, and how long am I supposed to run it in each mode?…more

Read answer

Loading more Q&A...

You've seen all 177 Q&A articles!