Pool water chemistry involves maintaining proper levels of chlorine (1-3ppm based on CYA), pH (7.4-7.6), alkalinity (60-120ppm), and calcium hardness (250-350ppm for plaster). Regular testing with quality kits and proper chemical dosing ensures safe, clear water.
Most Las Vegas pools operate year-round due to the desert climate, with peak season from May through October. Many commercial pools and resorts stay open 24/7 during peak months, while residential pools typically benefit from heating systems November through March.
Yes, most pool owners need pH Up and pH Down chemicals to maintain the ideal pH range of 7.4-7.6, but you may not need both products depending on your water's natural tendencies.
Yes, salt water pools do freeze, but at slightly lower temperatures than fresh water (around 28-32°F vs 32°F). The salt content provides minimal freeze protection, so proper winterization is still essential.
Yes, saltwater pools absolutely need cyanuric acid (stabilizer) to protect the chlorine generated by the salt cell from UV degradation. Maintain CYA levels between 70-80 ppm for optimal protection.
Salt water pool systems use electrolysis to convert dissolved salt into chlorine sanitizer. The salt cell generates chlorine from sodium chloride, eliminating the need to manually add chlorine while maintaining proper sanitation.
Cloudy pool water results from poor filtration, chemical imbalance, or contaminants. Fix by testing chemistry, shocking to proper FC/CYA ratio, and running filtration 24/7 until clear.
Cleaning a salt water pool requires testing and balancing chemistry (FC, pH, CYA), maintaining the salt cell, and regular physical cleaning of surfaces and equipment.
Salt water pools do contain chlorine - the salt chlorine generator converts salt into chlorine through electrolysis. You still need to maintain proper chlorine levels and test regularly.
Weekly pool maintenance involves testing and balancing water chemistry (pH 7.4-7.6, proper chlorine levels), cleaning skimmers and equipment, brushing walls, and vacuuming debris. Consistent weekly care prevents expensive repairs and keeps your pool safe for swimming year-round.
Salt water pools do not raise blood pressure through skin absorption, as pool salt levels are much lower than ocean water. However, improper chemical balance can cause skin irritation that may indirectly affect stress levels.
Yes, saltwater pools absolutely need chlorine to sanitize the water. The salt water generator creates chlorine from salt, but you still need to monitor levels and add chlorine manually when needed.
To raise pool alkalinity, add sodium bicarbonate (baking soda) at 1.5 pounds per 10,000 gallons to increase alkalinity by 10 ppm. Test first, add chemicals slowly, and retest after 6 hours.
Check if your salt cell is working by inspecting for visible bubbles during operation, testing chlorine output levels, and verifying proper salt levels (3000-4000ppm). A functioning cell should produce steady bubbles and maintain chlorine levels without supplemental shocking.
Yes, salt water pools absolutely use chlorine. The salt water generator converts salt into chlorine through electrolysis, producing the same sanitizing chlorine as traditional pools, just through a different method.
