Results for "startup"

Winterizing Easy 2-3 hours for complete opening process 207 👍 1

Do I Need a Pool Opening Kit? Spring Pool Startup Guide

Called out to open my 20x40 inground pool after winter and I'm staring at nasty green water wondering if I need an opening kit. Store pushing their $80 opening kit with shock, algaecide, clarifier, etc. Makes it easy but seems pricey. Should I just buy liquid chlorine and acid separately? What's actually worth getting?…more

Read answer

Above Ground Medium 8-12 hours 496 👍 0

Above Ground Pool Installation: Complete Step-by-Step Guide

I'm installing an above ground pool and need to know about site prep, what order to assemble everything, and how long this will realistically take. Don't want to mess this up.…more

Read answer

Pump Problems Medium 2-3 hours 303 👍 0

Can I Leave Pool Pump Outside in Winter? Storage Guide

During freezing weather my pool pump starts making this bizarre clicking sound that I've never heard before, and I'm genuinely confused about what's causing it. We have young kids who love to explore everything in the backyard, and I want to make sure our pool pump will be safe sitting outside through the cold months.

I've heard horror stories about pumps getting damaged from freezing, which could lead to expensive repairs or worse - safety issues when we open the pool next spring for the kids. Should I be taking it inside somewhere, or is there a way to properly protect it outdoors? We live in an area that definitely gets below freezing, so I'm particularly concerned about freeze damage.…more

Read answer

Editor's Pick

Dolphin Nautilus CC Plus Robotic Pool Vacuum (2026)

Wall-climbing scrubber brush and Wi-Fi control — ideal for in-ground pools up to 40 ft. View on Amazon →

Sponsored

Winterizing Medium 2-3 hours 262 👍 0

Should I Cover My Pool Heater in Winter? Complete Guide

Our new house came with a Pentair heat pump that the previous owner left completely exposed to the elements with zero winter protection. I have a Pentair heat pump that I've been using throughout the swimming season, and I'm wondering about proper winterization procedures.

I've heard conflicting advice about whether pool heaters need to be covered during the off-season. Some neighbors with gas heaters say they just shut them down and leave them exposed, while others insist that all heaters should be covered regardless of type. My heat pump manufacturer's manual mentions winterization but isn't super clear about covering requirements.

Given our climate with snow, ice, and temperatures that can drop below freezing for extended periods, what's the best practice for protecting different types of pool heaters? Does it matter if it's a heat pump versus a gas heater, and are there specific covers or protection methods that work best for harsh winter conditions?…more

Read answer

Pump Problems Easy 45 minutes 231 👍 0

Should You Cover Your Pool Pump in Winter? Complete Guide

According to my pool pump manual I should cover it for winter, but that completely contradicts what three different pool technicians have told me.

I've already done the basic winterization steps but I'm worried about leaving expensive equipment exposed to the elements for months. Should I be covering my pump or not? And if so, what kind of cover works best? I don't want to make a costly mistake here.…more

Read answer

Water Chemistry Easy 2-4 hours 781 👍 0

Do You Need to Shock Pool After Filling? Complete Guide

Staring at my freshly filled pool with a bucket of shock in hand — is it safe to dump this in right away, or could it damage anything? We just finished filling our 18x36 inground pool after having some liner work done this spring. The water came from our well and looks crystal clear, but I'm wondering if I need to shock it before my family starts swimming? A neighbor mentioned something about always shocking after a fresh fill, but I'm not sure if that's necessary since the water looks fine. What's the proper procedure here? I have test strips but haven't checked the chemistry yet - wanted to get some advice first on whether shocking is a must-do step.…more

Read answer

Above Ground Medium 4-6 hours initial setup, monthly maintenance 326 👍 0

Can You Leave Above Ground Pool Up All Year? Winter Guide

Halfway through winter prep I've tried partial winterization, full chemical shutdown, and running it with a heater — but I'm still getting conflicting advice about leaving my above ground pool up year-round.

Is it actually possible to leave my above ground pool up through winter and do the winterization myself? What really needs to be done to prevent damage, and can I skip some of these expensive add-ons they keep pushing? I'd rather invest time than keep throwing money at the pool store every season.…more

Read answer

Above Ground Medium 4-6 hours for winterization 243 👍 0

Can You Leave Above Ground Pool in Winter? Complete Guide

The frost is creeping up the sides of my above ground pool right now and I'm staring at it wondering if I should tear this whole thing down or just leave it up all winter. I live in an area that gets pretty cold with some snow, and I'm not sure if my pool can handle it or if I'm just asking for a disaster come spring.

I've got one of those steel frame pools, not the super cheap inflatable kind. What do I need to do to winterize it properly? Or should I just bite the bullet and take it down? Really hoping someone can save me from hours of disassembly work!…more

Read answer

Salt Water Medium 2-3 days for full setup 226 👍 0

How to Set Up and Maintain a Salt Water Pool - Complete Guide

The pool service quote to convert my inherited chlorine pool to saltwater was over $1,200 — is there a DIY way for under $800? The pool store told me it's easier to maintain, but I honestly have no idea where to start or what I'm getting myself into.

What exactly do I need to buy and install? I keep hearing about salt generators and different chemical levels - how much salt am I supposed to add, and do I still need to worry about chlorine and all that other stuff? Any step-by-step guidance would be amazing since I'm pretty overwhelmed right now.…more

Read answer

Winterizing Medium 60-90 minutes 224 👍 0

Do I Need to Winterize My Pool Heater? Complete Guide

Woke up dreading winterizing season because my old gas heater routine was foolproof — but this new heat pump has me completely lost. We definitely get some cold snaps here where temps drop into the 30s and sometimes lower.

I've heard horror stories about equipment getting damaged over winter, but I'm not sure if that's just pool store scare tactics or if there's real risk. What's the worst that could happen if I skip the winterizing process? Just trying to figure out if this is one of those "nice to do" things or absolutely essential.…more

Read answer

Heaters Hard 6-8 hours 182 👍 2

How to Install a Pool Heater: Complete Step-by-Step Guide

Getting quotes for a pool heater installation and they range from $2,500 to $6,000 depending on the contractor. Trying to figure out if I can tackle this myself to save some money. Got decent plumbing skills and already ran the gas line for our grill last year — is a pool heater install realistic for a handy homeowner?…more

Read answer

Product Ranking 5 compared

Best Solar Pool Skimmers

4.4 (8,400 reviews)

Water Chemistry Medium 2-4 hours 1,775 👍 0

Do Vinyl Pools Need Calcium? Complete CH Guide 2026

Before our big pool party this Saturday, I'm getting completely contradictory advice about whether my vinyl pool even needs calcium added! I keep reading conflicting info online - some sources say vinyl pools don't need calcium at all, others say they do but at different levels than concrete pools. My test strips show I'm sitting around 100 ppm right now and I'm not sure if that's too low or if I even need to worry about it.

I've been dealing with some metal staining on my vinyl liner and wondering if low calcium could be making it worse by causing corrosion. But I'm also terrified of adding too much and ending up with scaling or that dreaded cloudy water that takes forever to clear up. What's the sweet spot for calcium hardness in vinyl pools, and is it really different from other pool types?…more

Read answer

Heaters Hard Professional installation required 1,135 👍 27

Can Pool Heater and Pump Share Same Circuit? Info Guide

Finally it's midnight and my pool heater tripped the breaker for the third time tonight — desperately need to know if wiring both heater and pump together is causing this mess. The pool store is pushing me to hire their electrician for thousands of dollars, but I'm handy with electrical work and want to do this myself if possible.

Before I start running wiring, I need to know if there are any safety issues with putting both the heater and pump on one circuit. They're both major electrical components so I want to make sure I'm not creating a fire hazard or code violation. Anyone have experience with DIY pool electrical work?…more

Read answer

Salt Water Medium 45 minutes 971 👍 2

How Salt Water Pool Systems Work: Complete Guide 2026

Despite my pool guy insisting I need to understand salt water electrolysis to maintain my system, his overly technical explanation makes me think he's overcomplicating things.
Specifically, what happens at the cellular level when salt water passes through the system? How does dissolved sodium chloride get converted into an effective sanitizing agent, and what role does electrolysis play in this conversion process? I want to grasp the complete operational mechanism before investing in this technology.…more

Read answer

Equipment Medium 2–3 hours (plus cure time) 968 👍 44

Add a Shutoff Valve to Your Pool Waste Line

My pool equipment pad has a waste line that just dumps straight out to the side yard with zero control — no valve, nothing. I found a YouTube tutorial on how to splice in a shutoff valve, grabbed the supplies, and cut into the pipe... and now I've got a bigger mess than before. The dry-fit didn't hold the way the video showed, one of my cuts came out slightly angled, and I'm second-guessing the whole thing before I actually glue anything permanently.

The waste line is 1½-inch PVC coming off the back of my multiport filter valve. It dribbles between backwash cycles because there's nothing shutting it off, and I'd like to fix that properly. I want to understand what type of valve to actually use here, how to prep the pipe ends correctly after a rough cut, and how to solvent-weld everything so it doesn't leak or blow apart under pressure.

Can someone walk me through the real process — choosing the right valve, making clean cuts, dry-fitting, priming and cementing, and how long I need to wait before firing the pump back up? I want to get this right the second time.…more

Read answer

Loading more Q&A...

You've seen all 38 Q&A articles!