Results for "waste line"

Equipment Medium 2–3 hours (plus cure time) 1,048 👍 45

Add a Shutoff Valve to Your Pool Waste Line

My pool equipment pad has a waste line that just dumps straight out to the side yard with zero control — no valve, nothing. I found a YouTube tutorial on how to splice in a shutoff valve, grabbed the supplies, and cut into the pipe... and now I've got a bigger mess than before. The dry-fit didn't hold the way the video showed, one of my cuts came out slightly angled, and I'm second-guessing the whole thing before I actually glue anything permanently.

The waste line is 1½-inch PVC coming off the back of my multiport filter valve. It dribbles between backwash cycles because there's nothing shutting it off, and I'd like to fix that properly. I want to understand what type of valve to actually use here, how to prep the pipe ends correctly after a rough cut, and how to solvent-weld everything so it doesn't leak or blow apart under pressure.

Can someone walk me through the real process — choosing the right valve, making clean cuts, dry-fitting, priming and cementing, and how long I need to wait before firing the pump back up? I want to get this right the second time.…more

Read answer

Filters Easy 45-90 minutes 557 👍 2

Can I Vacuum Pool on Waste? Complete Filter Setting Guide

Halfway through prepping for our pool party this Saturday, I realized I have no clue which filter setting to use when vacuuming all this debris. I've got some pretty heavy debris that's settled on the bottom of my pool after a storm, and I'm worried about clogging up my filter if I vacuum it all up normally.

The guy at the pool store mentioned something about using the "waste" setting when vacuuming, but I didn't really understand what he meant. Does this actually work, and when should I be using waste instead of the regular filter setting? I don't want to mess anything up since I'm still learning all this stuff.…more

Read answer

Equipment Medium 45 minutes 692 👍 17

Can You Vacuum Pool on Recirculate? Complete Guide

Pulled a ton of storm debris out of our pool and now I'm trying to decide between normal filtration and recirculate mode for vacuuming.
The pool is so messy that I'm concerned about clogging up our filter system if I vacuum normally, but I also don't want to compromise water quality.

Can I vacuum the pool using the recirculate setting instead? I want to make sure I understand what this does - will it actually clean the water properly or just move things around? My main concern is whether the water will be safe and clean enough for the kids to swim in afterward, or if I need to take additional steps to ensure proper filtration.…more

Read answer

Editor's Pick

Dolphin Nautilus CC Plus Robotic Pool Vacuum (2026)

Wall-climbing scrubber brush and Wi-Fi control — ideal for in-ground pools up to 40 ft. View on Amazon →

Sponsored

Maintenance Easy 45 minutes 260 👍 1

Can You Vacuum Pool on Backwash? Proper Filter Settings

Already tried everything but my pool filter clogs every time I vacuum, the water won't clear up, AND I can't figure out the right filter setting.
Should I have it on backwash while I vacuum, or use a different setting? Don't want to mess anything up.…more

Read answer

Equipment Medium 45 minutes 542 👍 0

How to Vacuum Pool Without a Skimmer - 4 Easy Methods

Before the pool season even starts, my skimmer cracks from freeze damage every single year, leaving me staring at a swampy disaster. I've been dumping shock and algaecide for weeks but I know I need to vacuum out all this debris and dead algae to actually win this battle.

The problem is my skimmer is completely shot and won't be replaced for another week. Is there any way to vacuum without using the skimmer? I'm willing to try anything at this point - manual methods, different equipment, whatever it takes. I just need to get this gunk out of my pool before it gets any worse!…more

Read answer

Salt Water Medium 24-48 hours waiting period, 1 hour actual work 833 👍 24

Can I Vacuum Pool After Adding Salt? Complete Timing Guide

My pool's been sitting there taunting me ever since I added all that salt yesterday, and I'm completely unsure if vacuuming is even safe yet. I've got some debris that needs to come out, but I don't want to mess anything up with my equipment or screw up how the salt distributes.

Should I wait a certain amount of time before running the vacuum? And if so, how long are we talking here? Don't want to damage my pump or anything by being too eager to clean!…more

Read answer

Maintenance Easy 5 minutes 423 👍 0

Pool Glossary: SLAM, Sanitizer, PSI, CYA & Common Pool Terms

I keep seeing pool terms and abbreviations like SLAM, CYA, FC, PSI, sanitizer, backwash, and shock. What do they mean in plain English?…more

Read answer

Winterizing Medium 6-8 hours over 2-3 weeks 265 👍 0

How to Winterize Your Inground Pool: Complete Step Guide

Planning to winterize my new inground pool using the same routine that worked perfectly on my old above-ground, but worried the chemical and equipment needs are completely different.

What are the specific steps I should follow for proper winterization? I'm particularly concerned about getting the water chemistry balanced correctly and protecting my filtration system and plumbing from freeze damage. Should I be targeting specific chemical levels, and what's the proper sequence for draining, cleaning, and applying winterizing treatments?…more

Read answer

Filters Easy 30 minutes 455 👍 1

How to Use a Pool Sand Filter: Complete Step-by-Step Guide

The pool sand filter that worked fine for years started giving me cloudy water last month but now it's completely dead and those expensive pool store fixes aren't working.

Can someone just give me the straight facts on how to actually operate my sand filter? I want to know the basic daily routine, when I should backwash, and how to tell if it's working properly. I'm looking for simple, practical steps I can handle myself without breaking the bank on unnecessary add-ons.…more

Read answer

Filters Easy 5 minutes 427 👍 0

How Long to Backwash Pool Sand Filter: Complete Guide

Since it's 11 PM and my sand filter pressure just spiked to dangerous levels — need to backwash this thing before my pump burns out overnight. Right now I'm dealing with my sand filter - the pressure has gone up quite a bit from when I first cleaned it, and I know it's time to backwash.

But here's my question: how long should I actually run the backwash cycle? I don't want to waste a ton of water (my utility bills are already high enough), but I also want to make sure I'm doing it properly. Is there a specific time I should aim for, or some other way to tell when it's done? I'd rather figure this out myself than pay someone else to do basic maintenance.…more

Read answer

Filters Easy 10 minutes 312 👍 0

Do I Need to Backwash My Pool Filter? Complete Guide

Our pool filter pressure started as slightly higher gauge readings last month but now it's climbing so dangerously high I'm wondering what specific indicators tell me when to backwash.

What are the key signs I should monitor to determine when backwashing is necessary? Are there different procedures for different types of filters, or does the same process apply across all filtration systems?…more

Read answer

Product Ranking 8 compared

Best Pool Lights

4.5 (19,800 reviews)

Filters Medium 15 minutes 968 👍 0

How Pool Sand Filters Work: Complete Diagram & Process

New pool owner trying to understand how my sand filter actually cleans the water. Watched a couple YouTube videos but they all skip over the important details. The pool store just says "backwash when pressure goes up" but I want to actually understand what's happening inside this tank.…more

Read answer

Winterizing Easy 1–2 hours 16 👍 1

Where to Drain Pool Water When Winterizing

Nobody told me this part would be confusing. When I started dropping the water level to close the pool for winter, I realized I had absolutely no idea where that water is actually supposed to go. My pool is an inground, and right now I've got a submersible pump running — but I keep stopping because I'm genuinely not sure if I'm about to flood my neighbor's yard or create a problem with the municipality.

The water has to go somewhere, obviously, but there seem to be a few options and I can't figure out which one is actually correct. Is it okay to run it out to the street drain? Can I just let it soak into the yard? Or is there a hookup to the sewer I should be using instead?

I want to do this right and not get a fine or cause a drainage mess. Any guidance would be really helpful before I crank the pump back on.…more

Read answer

Maintenance Easy 1–2 hours (setup) + ongoing management 1,070 👍 54

Ducks in Your Pool? How to Keep Them Out for Good

Three straight days of rain last week apparently convinced a pair of mallards that my backyard pool is their new favorite pond. Every morning I come out and they're splashing around on the steps and leaving droppings all along the waterline and on the surrounding deck. It's pretty gross to deal with, and I'm starting to wonder whether the water itself is even safe to swim in after all that.

I've heard mixed things about those floating alligator decoys or the big plastic swan deterrents you can buy online — do those actually work, or do ducks wise up to them pretty quickly? I'd rather not spend money on something that only works for a week before they ignore it completely.

My bigger concern right now is honestly the water safety side of things. Is duck waste a real health hazard for swimmers, or am I overthinking it? And if I do need to treat the pool after a duck visit, what's the right way to do that? We have a 20,000-gallon in-ground with a salt chlorinator if that matters.…more

Read answer

Equipment Easy 15 minutes 644 👍 0

Do I Need a Pool Vacuum Plate? Complete Setup Guide

Noticed my 20,000-gallon inground pool vacuum's been running without a vacuum plate and now I'm worried it's dangerous with kids swimming daily. My skimmer doesn't seem to have a separate vacuum port - just the main opening where the basket sits. I've been manually vacuuming by removing the basket and connecting my vacuum hose directly to the suction line, but I lose all skimming action during the process.

The pool stays pretty clean most of the time with my regular chemical balance (chlorine at 2.0 ppm, pH 7.4, alkalinity 120 ppm), but I do need to vacuum weekly to pick up the fine debris that settles on the bottom. Would a vacuum plate help me maintain skimming while vacuuming, or is there another setup I should be considering for my skimmer configuration?…more

Read answer

Loading more Q&A...

You've seen all 26 Q&A articles!