Results for "chemical wait times"

Algae Green Pool Medium 2-3 days 614 👍 6

How Long After Shocking Pool to Add Algaecide? Complete Guide

The pool service guy insists I wait a full 24 hours after shocking before adding algaecide, but that seems excessive when algae keeps spreading. I have two young kids who are eager to get back in the water, and I want to make sure I'm doing this chemical treatment properly.

Should I wait a certain amount of time between the shock treatment and adding the algaecide? I'm also concerned about when the water will be safe for swimming again. What chlorine levels should I be looking for before adding more chemicals, and how do I know when everything is balanced enough for the kids to swim safely?…more

Read answer

Water Chemistry Medium 2-4 days for complete dissolution 380 👍 0

How to Dissolve Pool Stabilizer (CYA) - Complete Guide

Around $800 worth of granular cyanuric acid is just sitting on my pool bottom — would my warranty cover this stabilizer dissolution mess before I drain 20,000 gallons? I have a 20,000 gallon inground pool and my current CYA reading is around 15 ppm - I need to get it up to about 50 ppm. I tried just broadcasting the granules directly into the pool like I do with other chemicals, but they seem to just sink to the bottom and sit there without dissolving much.

I've heard that cyanuric acid is notoriously slow to dissolve compared to other pool chemicals. What's the most effective method to get this stuff into solution? Should I be pre-dissolving it somehow, or is there a specific technique that works better? I want to make sure I'm doing this right and not wasting product or creating hot spots in my pool.…more

Read answer

Algae Green Pool Medium 4-6 hours 258 👍 0

Can I Shock Pool After Adding Algaecide? Complete Guide

Spent all morning watching my pool turn green with algae patches and now I'm holding bottles of algaecide and shock with no clue which to use first. But I'm not sure about the timing - can I add both in the same day? Should I put the algaecide in first, or does it matter?

Also, if I can use both, how long should I wait between adding them? Don't want to mess up my water chemistry or waste expensive chemicals by doing this wrong!…more

Read answer

Product Ranking 5 compared

Best Solar Pool Skimmers

4.4 (8,400 reviews)

Water Chemistry Easy 15 minutes 223 👍 0

Do I Need pH Up and Down for Pool? Essential pH Guide

My husband casually mentioned that we're the only neighbors who stock both pH Up AND pH Down, and now I'm suspicious the pool store is playing us. That's like $40-50 just for pH adjustment chemicals alone!

Is this just upselling, or do I actually need to keep both products on hand? My pool seems to drift one way or the other pH-wise, but rarely both directions. Looking for some honest advice from people who aren't trying to empty my wallet every time I walk in for supplies.…more

Read answer

Water Chemistry Easy 15 minutes 214 👍 0

Can I Use Pool Chlorine Tablets in My Toilet? Safety Guide

Standing in my garage with a bucket of leftover trichlor tablets from last season and wondering if these can pull double duty as toilet bowl cleaners. My thinking is that chlorine is chlorine, right? I've seen those blue toilet bowl tablets that slowly dissolve and keep things clean, so I figured maybe I could just drop one of my 3-inch pool tablets in the tank to do the same thing.

Before I try this, I want to make sure it's actually safe for my plumbing and won't cause any problems. Are pool chlorine tablets too strong for toilet use? I don't want to damage my pipes or create any health hazards, but it seems like it could be a good way to use up these extra tablets instead of letting them go to waste.…more

Read answer

Water Chemistry Medium 2-3 days 202 👍 0

How to Raise Pool Stabilizer (CYA) Levels - Complete Guide

Already tried three different YouTube tutorials to raise my pool's CYA levels but somehow made them even lower than before. Pool is about 10,000 gallons. What's the right amount of cyanuric acid to add and what's the best method? Granular or liquid stabilizer?…more

Read answer

Water Chemistry Easy 30 minutes 191 👍 0

Can I Add Pool Chemicals at the Same Time? Safe Mixing Guide

Spent all week prepping for Saturday's pool party and now I'm scrambling to balance the water but wondering if I can add multiple chemicals together to save time.
The pool store gave me a bunch of different chemicals but didn't really explain the timing. I want to make sure I'm not going to create some dangerous reaction or mess up my water chemistry. Should I be spacing these out somehow?…more

Read answer

Equipment Medium 8-24 hours wait time, 30-60 minutes vacuuming 175 👍 0

Can You Vacuum Pool After Shock? Complete Safety Guide

Last night my wife casually mentioned our 20,000 gallon inground pool still looks cloudy after yesterday's calcium hypochlorite shock treatment, and now it's all I can see. I added about 2 pounds of shock around 7 PM, and now this morning I'm wondering when it's safe to start vacuuming.

I have a lot of debris that settled to the bottom overnight, including some leaves and dirt that blew in during a storm. My test strips are showing the chlorine is still pretty high - looks like it's reading around 8-10 ppm this morning. I don't want to damage my pool equipment or create any safety issues, but I'm eager to get the pool cleaned up since we have guests coming over this weekend.

What's the recommended waiting period before I can safely vacuum? Should I wait for the chlorine to drop to a certain level first, or is there a standard timeframe I should follow regardless of the chemical readings?…more

Read answer

Water Chemistry Easy 30 minutes 171 👍 0

How Long to Wait Before Swimming After Pool Chemicals

Apparently I'm standing in my garage staring at three different pool chemicals I added this morning with no clue how long I actually need to wait before diving in. Yesterday I added liquid chlorine to bring my levels up from 1.2 ppm to around 3.0 ppm, and I wasn't sure if we could swim that evening or needed to wait until the next day.

I'm planning to shock the pool this weekend with calcium hypochlorite since we've had some cloudy water issues, and I also need to adjust the pH which has been running high at 7.8. The kids are eager to get back in the pool, but I want to make sure I'm following proper safety guidelines. Do different chemicals have different waiting periods, and should I always test the water first regardless of how much time has passed?…more

Read answer

Water Chemistry Easy 30 minutes 170 👍 0

How to Raise Pool pH: Complete Guide to pH Increaser

Before I dump chemicals into my pool, I'm trying to decide between adding baking soda or actual pH increaser to bring it up from 7.0. The pool store told me I need to raise it, but they mentioned a couple different chemicals and I'm honestly a bit confused about which one to use.

I've heard about soda ash and baking soda, but I'm not sure what the difference is or how much I should add to my 20,000 gallon pool. I really don't want to mess this up and swing it too far the other way. Should I be adding the chemicals slowly, and do I need to have my pump running when I do it? Any guidance would be really appreciated!…more

Read answer

Water Chemistry Medium 4-6 hours 168 👍 0

Can I Shock Pool After Adding Baking Soda? Complete Guide

Noticed my neighbor's pool stays crystal clear when he adds baking soda then shocks immediately, but mine turns cloudy every time — what's his secret? I added baking soda to raise my alkalinity this morning, but now I'm wondering about timing.

Can I go ahead and shock the pool right away, or do I need to wait? I don't want to waste the shock treatment or mess up my water chemistry. The pool store guy mentioned something about waiting but then tried to upsell me on their "premium" shock system. Just looking for straight answers on proper timing and whether I should test anything specific before shocking.…more

Read answer

Product Ranking 8 compared

Best Pool Filters

4.5 (15,600 reviews)

Water Chemistry Medium 30-60 minutes 168 👍 0

Can You Vacuum Pool After Adding Chemicals? Safety Guide

Despite adding chlorine shock and algaecide yesterday, is it dangerous to vacuum my pool with my kids swimming here regularly? Can I start vacuuming immediately or do I need to wait? Don't want to mess up the chemical distribution or damage my equipment.…more

Read answer

Water Chemistry Medium 6-8 hours 165 👍 0

Can I Shock Pool After Adding Alkalinity? Timing Guide

Walked out to check my 20,000 gallon inground pool after dosing it with sodium bicarbonate this morning to raise alkalinity from 60 ppm to 100 ppm, and now I'm second-guessing my shocking timeline. My pH was sitting at about 7.2 before I added the alkalinity increaser, but I know adding baking soda can bump up the pH as well.

I'm planning to shock the pool tonight since we've had some heavy swimmer load this week and the water is starting to look a bit cloudy. Should I wait a certain amount of time after adding the alkalinity before I shock? I want to make sure the shock is as effective as possible and I've heard that pH levels can affect how well chlorine works.

My current test results show chlorine at 1.5 ppm, alkalinity should now be around 100 ppm, and I'm not sure what the pH has risen to after adding the sodium bicarbonate earlier today.…more

Read answer

Above Ground Medium 15 minutes 154 👍 0

How Long Do Inground Pool Liners Last? Complete Guide

Replaced my inground pool liner three years ago — before I start tearing into another replacement would this failing liner be covered under my home warranty? The pool store mentioned that I'll eventually need to replace the vinyl liner, but they didn't give me much detail about timing.

How long do these liners typically last before needing replacement? Is it something I should be budgeting for in the next few years, or is it more of a long-term expense? I want to make sure I'm taking proper care of it so it lasts as long as possible.…more

Read answer

Maintenance Easy 15 minutes 149 👍 0

Do I Need to Dissolve Pool Shock? Complete Dissolution Guide

Looked everywhere online ever since I switched to granular pool shock, but still can't figure out if I need to dissolve it first or just dump it straight in. Package doesn't clearly say if I need to dissolve it first or can just toss it straight into the pool.

What's the right way? Don't want to mess up my pool liner or waste the chemicals.…more

Read answer

Loading more Q&A...

You've seen all 75 Q&A articles!