The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Most Las Vegas pools operate year-round due to the desert climate, with peak season from May through October. Many commercial pools and resorts stay open 24/7 during peak months, while residential pools typically benefit from heating systems November through March.
Pool filters come in three main types: sand filters (low maintenance, 5-7 year lifespan), cartridge filters (easy cleaning, 1-2 year replacement), and DE filters (finest filtration, requires backwashing every 4-6 weeks).
To fix low stabilizer, add cyanuric acid at 1 pound per 10,000 gallons to raise CYA by 10ppm. For high levels over 80ppm, partially drain and refill your pool, as there's no chemical way to lower stabilizer.
Above ground pools require proper installation on level ground, regular liner maintenance (lasting 6-10 years), and balanced water chemistry with chlorine levels based on CYA. This comprehensive guide covers everything from DIY installation to winterization and troubleshooting common issues.
Pool leaks can occur in the shell, plumbing, or equipment and are detected using bucket tests, dye tests, and pressure testing. Most minor leaks can be DIY repaired, but structural damage requires professional assessment.
Most pools don't need algaecide if you maintain proper chlorine levels (2-5ppm FC) and adequate CYA (30-50ppm). Algaecide is mainly useful for prevention during high-risk periods or as backup insurance, not for treating active algae blooms.
To raise pool pH, add sodium carbonate (soda ash) for quick increases or sodium bicarbonate (baking soda) for gradual increases. Test first, calculate dosage based on pool size, and add chemicals slowly with circulation running.
Pool chemical shelf life varies dramatically: liquid chlorine lasts 2-5 years, granular chlorine 2-3 years, while pH adjusters and alkalinity increasers can last indefinitely when stored properly.
Add sodium bicarbonate (baking soda) to increase pool alkalinity - use 1.5 lbs per 10,000 gallons to raise alkalinity by 10 ppm. Test first, add slowly, and retest after 6 hours.
Pool filter lifespan depends on the type: cartridge filters last 1-2 years, sand filters last 5-7 years, and DE filters last 8-10 years. Replace when cleaning becomes ineffective or damage occurs.
Pool algae can cause skin rashes, irritation, and other health issues through direct contact or by creating conditions that harbor harmful bacteria. The key is eliminating algae through proper SLAM treatment and maintaining balanced water chemistry.
Clear cloudy pool water by testing and balancing chemicals first, then shock with liquid chlorine to 2-3x your stabilizer level, run the filter 24/7, and backwash frequently until water clears completely.
Clear cloudy pool water by testing and balancing your chemistry first, then shock with liquid chlorine to 3x your CYA level and run your filter 24/7 until the water clears completely.
Most pools don't need phosphate remover if you maintain proper chlorine levels. Only consider phosphate removal if you have persistent algae problems despite balanced water chemistry and proper sanitizer levels.
