Pool water chemistry involves maintaining proper levels of chlorine (1-3ppm based on CYA), pH (7.4-7.6), alkalinity (60-120ppm), and calcium hardness (250-350ppm for plaster). Regular testing with quality kits and proper chemical dosing ensures safe, clear water.
The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
To fix low stabilizer, add cyanuric acid at 1 pound per 10,000 gallons to raise CYA by 10ppm. For high levels over 80ppm, partially drain and refill your pool, as there's no chemical way to lower stabilizer.
Above ground pools require proper installation on level ground, regular liner maintenance (lasting 6-10 years), and balanced water chemistry with chlorine levels based on CYA. This comprehensive guide covers everything from DIY installation to winterization and troubleshooting common issues.
Pool opening involves removing winter covers, inspecting equipment, reconnecting plumbing, and balancing water chemistry. Start with equipment inspection, fill and reconnect systems, then shock and balance chemicals before swimming.
Salt water pools use electrolysis to generate chlorine from dissolved salt, requiring proper water chemistry balance including pH, alkalinity, and CYA levels. They still need regular maintenance and chemical adjustments despite producing their own chlorine.
Most pools don't need algaecide if you maintain proper chlorine levels (2-5ppm FC) and adequate CYA (30-50ppm). Algaecide is mainly useful for prevention during high-risk periods or as backup insurance, not for treating active algae blooms.
To raise pool pH, add sodium carbonate (soda ash) for quick increases or sodium bicarbonate (baking soda) for gradual increases. Test first, calculate dosage based on pool size, and add chemicals slowly with circulation running.
It appears you may have asked about airline miles by mistake when looking for pool maintenance help. This comprehensive guide covers common pool issues and maintenance procedures to get your pool water crystal clear and properly balanced.
Yes, salt water pools do freeze, but at slightly lower temperatures than fresh water (around 28-32°F vs 32°F). The salt content provides minimal freeze protection, so proper winterization is still essential.
Add sodium bicarbonate (baking soda) to increase pool alkalinity - use 1.5 lbs per 10,000 gallons to raise alkalinity by 10 ppm. Test first, add slowly, and retest after 6 hours.
Pool chemical shelf life varies dramatically: liquid chlorine lasts 2-5 years, granular chlorine 2-3 years, while pH adjusters and alkalinity increasers can last indefinitely when stored properly.
Yes, saltwater pools absolutely need cyanuric acid (stabilizer) to protect the chlorine generated by the salt cell from UV degradation. Maintain CYA levels between 70-80 ppm for optimal protection.
Pool filter lifespan depends on the type: cartridge filters last 1-2 years, sand filters last 5-7 years, and DE filters last 8-10 years. Replace when cleaning becomes ineffective or damage occurs.
Salt water pools still require chemicals for proper water balance, including pH adjusters, stabilizer, and calcium hardness increasers. The salt chlorine generator only produces chlorine, not other essential chemicals needed for safe swimming water.
