Most Las Vegas pools operate year-round due to the desert climate, with peak season from May through October. Many commercial pools and resorts stay open 24/7 during peak months, while residential pools typically benefit from heating systems November through March.
Pool filters come in three main types: sand filters (low maintenance, 5-7 year lifespan), cartridge filters (easy cleaning, 1-2 year replacement), and DE filters (finest filtration, requires backwashing every 4-6 weeks).
Pool heaters can fail due to electrical issues, gas problems, water flow restrictions, or component failures. Most common issues like pilot light problems, low water flow, and thermostat malfunctions can be diagnosed and often fixed without professional help.
Pool pumps require regular maintenance and troubleshooting to operate efficiently. Common issues include low water flow, unusual noises, and electrical problems that can often be resolved with proper diagnosis and maintenance.
Running a pool pump off an extension cord is extremely dangerous and not recommended. Pool pumps require dedicated electrical circuits with GFCI protection for safety.
Most salt water pool cells can be rebuilt by replacing the titanium plates and internal hardware, typically costing 50-70% less than a new cell. However, rebuilding is only worthwhile if the cell housing is intact and you have technical skills.
To backwash a pool filter, turn off the pump, set the multiport valve to BACKWASH, turn the pump back on for 2-3 minutes until water runs clear, then switch to RINSE for 30 seconds before returning to FILTER mode.
Salt water pools still require chemicals for proper water balance, including pH adjusters, stabilizer, and calcium hardness increasers. The salt chlorine generator only produces chlorine, not other essential chemicals needed for safe swimming water.
Most pool owners do need a pool vacuum for thorough cleaning, but the type depends on your pool size, debris load, and maintenance preferences. Manual vacuums work for small pools with light debris, while automatic cleaners are essential for larger pools or heavy leaf loads.
Salt water pools are not self-cleaning and require regular maintenance including proper water chemistry balance, algae prevention, and equipment upkeep. The salt water generator only produces chlorine automatically but doesn't eliminate the need for active pool care.
You don't need to run your pool pump 24/7. Most pools require 8-12 hours of daily operation to achieve proper turnover and filtration, depending on pool size, bather load, and environmental conditions.
Pool heating time depends on heater type, pool size, and temperature difference. Gas heaters typically raise temperature 1-2°F per hour, while heat pumps achieve 3-5°F per hour on smaller pools.
Yes, you should cover your pool heater in winter if it's not being used, especially for heat pumps and electric heaters. Gas heaters typically need less protection but benefit from covers in harsh climates.
Variable speed pool pumps use permanent magnet motors and electronic controls to adjust RPM from 600-3450, providing precise flow control and significant energy savings compared to single-speed pumps.
Yes, salt pools absolutely need stabilizer (cyanuric acid) to protect the chlorine generated by your salt water generator from UV degradation. Target 70-80ppm for optimal protection and chlorine efficiency.
