Pool filters come in three main types: sand filters (low maintenance, 5-7 year lifespan), cartridge filters (easy cleaning, 1-2 year replacement), and DE filters (finest filtration, requires backwashing every 4-6 weeks).
Above ground pools require proper installation on level ground, regular liner maintenance (lasting 6-10 years), and balanced water chemistry with chlorine levels based on CYA. This comprehensive guide covers everything from DIY installation to winterization and troubleshooting common issues.
Yes, most pool owners need pH Up and pH Down chemicals to maintain the ideal pH range of 7.4-7.6, but you may not need both products depending on your water's natural tendencies.
Pool heaters can fail due to electrical issues, gas problems, water flow restrictions, or component failures. Most common issues like pilot light problems, low water flow, and thermostat malfunctions can be diagnosed and often fixed without professional help.
It appears you may have asked about airline miles by mistake when looking for pool maintenance help. This comprehensive guide covers common pool issues and maintenance procedures to get your pool water crystal clear and properly balanced.
To reset a Pentair variable speed pump, first turn off power at the breaker for 30 seconds, then restore power and reprogram your speed settings. Most reset issues are resolved with a complete power cycle.
Pool filter lifespan depends on the type: cartridge filters last 1-2 years, sand filters last 5-7 years, and DE filters last 8-10 years. Replace when cleaning becomes ineffective or damage occurs.
Clear cloudy pool water by testing and balancing chemicals first, then shock with liquid chlorine to 2-3x your stabilizer level, run the filter 24/7, and backwash frequently until water clears completely.
You don't need to run your pool pump 24/7. Most pools require 8-12 hours of daily operation to achieve proper turnover and filtration, depending on pool size, bather load, and environmental conditions.
You don't necessarily need to shock your pool weekly. Shocking frequency depends on usage, weather conditions, and your free chlorine levels. Most well-maintained pools need shocking every 2-3 weeks or when combined chlorine exceeds 0.5 ppm.
Pool filters work by pumping water through filter media that traps debris, dirt, and contaminants. The three main types are sand filters (use sand to trap particles), cartridge filters (use pleated fabric), and DE filters (use diatomaceous earth powder).
Pool cartridge filters typically last 1-4 weeks between cleanings and should be completely replaced every 3-6 months depending on usage, bather load, and maintenance frequency.
Most states don't require a license for basic pool cleaning services, but commercial pool service businesses may need business licenses or permits. Chemical handling and pool maintenance involving equipment repairs often have additional requirements.
Pool skimmers work very effectively when properly maintained, removing 80-90% of surface debris before it sinks. However, their effectiveness depends on proper water level, basket maintenance, and adequate pump flow.
Yes, you need a building permit for swimming pools in the Philippines, regardless of size or type. The process involves submitting plans to your local government unit (LGU), paying fees, and obtaining approval before construction begins.
