Results for "pool pump leak"

Leaks Easy 48 hours 312 👍 0

How to Tell If Your Pool Has a Leak - Step-by-Step Detection

Noticed my pool water dropped three inches this week at 11 PM tonight — need to figure out if there's a leak before my pool guy arrives tomorrow morning. I mean, I know some water evaporates naturally, especially with this heat, but it seems like more than usual.

Is there like a reliable way to test whether it's just normal evaporation or if there's actually a leak? I don't want to call a pool guy and pay a fortune if it turns out to be nothing, but I also don't want to ignore a real problem.…more

Read answer

Leaks Medium 2-4 hours 234 👍 0

Can Pools Leak? Common Causes & How to Detect Pool Leaks

After two weeks of watching my pool devour water at 3/4 inch per day with zero swimmers, I'm convinced there's a serious leak somewhere. My pool is 20,000 gallons, rectangular, and about 8 years old. The water chemistry seems fine - chlorine at 2.5 ppm, pH at 7.4, alkalinity at 110 ppm.

I know pools naturally lose some water to evaporation, especially here in Arizona where it's been hitting 105°F daily. But this seems like a lot more than usual. I've checked around the equipment pad and don't see any obvious puddles or wet spots. The pool company that installed it said minor water loss is normal, but I'm starting to worry this might actually be a leak.

What's the normal amount of water loss I should expect from evaporation alone? At what point should I be concerned that this is actually a structural leak rather than just normal evaporation? I want to catch any potential problems before they get worse and more expensive to fix.…more

Read answer

Leaks Medium 2-4 hours 259 👍 0

How to Find Pool Leak: Complete Detection Guide 2026

Got my pool water level dropping a massive 2-3 inches this week and there's definitely something wrong beyond normal evaporation. My water chemistry is balanced (chlorine at 2.5 ppm, pH 7.4, alkalinity 120 ppm), so I don't think it's a chemical issue causing excessive evaporation.

I suspect there might be a leak somewhere but I'm not sure how to pinpoint the exact location. Should I be checking around the skimmers and return jets first? I've heard about using food coloring to detect leaks but I'm not sure of the proper technique. Also wondering if there's a way to test whether it's a structural leak versus something in the plumbing lines.

What's the most systematic approach to track down where exactly the water is going? I'd rather diagnose this myself before calling in a expensive leak detection service if possible.…more

Read answer

Editor's Pick

Dolphin Nautilus CC Plus Robotic Pool Vacuum (2026)

Wall-climbing scrubber brush and Wi-Fi control — ideal for in-ground pools up to 40 ft. View on Amazon →

Sponsored

Leaks Medium 45 minutes 631 👍 16

Can Pool Jets Leak? Diagnosis & Repair Guide

I turned to a second opinion after my pool contractor quoted $3,000 to replumb my entire return system when I suspect these leaking jets might just need a simple repair. I keep losing water and can't pinpoint where it's going. The jets seem like the obvious suspect since they're these openings in the wall, but I honestly have no clue how they're put together or what could go wrong with them.

Is it even possible for the actual jets to leak? And if so, where would the leak typically happen - like around the edges where they meet the pool wall, or somewhere else entirely?…more

Read answer

Leaks Easy 2-3 hours over several days 218 👍 0

How to Know If Your Pool Has a Leak - Detection Signs & Tests

Pulled back my pool cover this morning to find the water level dropped three inches overnight, and now I'm panicking about whether it's evaporation or a real leak. The water level seems to be dropping faster than usual, especially after I top it off.

What should I be looking for to confirm whether it's really leaking? Are there specific tests I can do myself, or obvious signs around the pool area that would give it away? I'd rather catch this early before it becomes a bigger problem!…more

Read answer

Leaks Medium 2-3 hours 267 👍 0

Can Pool Leak Through Plaster? Causes & Detection Guide

Every time I check my pool it's down another few inches, the pool store wants $300 for leak detection, AND they're already pushing a full replaster job. Before I drop thousands of dollars, I need to know - can water actually leak through the plaster itself or are they just trying to make money off me?

I've noticed some hairline cracks and a few rough spots where the plaster feels different, but I'm not sure if that's normal wear or actual leak points. Is there a way I can test this myself instead of paying their ridiculous diagnostic fees? I'm tired of these stores pushing expensive solutions when maybe it's something I can identify and even fix on my own.…more

Read answer

Leaks Medium 2-4 hours for inspection, varies for repair 250 👍 0

Can Pool Lights Leak? Detection & Repair Guide 2026

Wondering if I should be concerned about water pooling around the light fixture in this rental's inground pool since I've never dealt with pool lights before. My pool has been losing water steadily for months now, and I've checked everything I can think of - the skimmer, return lines, you name it. But I just noticed the water level seems to drop more when the pool light is on, and there's some discoloration around the light fixture.

Is it actually possible for pool lights to leak? I never even considered this could be the source of my problem. If they can leak, what parts typically fail and how much water are we talking about? I'm really hoping this might finally be the answer to my water loss mystery!…more

Read answer

Leaks Hard 2-5 days for permanent repair 424 👍 1

Can Pool Leak Through Concrete? Yes - Here's How to Fix

Woke up this morning to find my pool water level had dropped another two inches overnight and now I'm wondering if water is somehow seeping through the concrete itself. My kids spend hours in the pool every day, and I've noticed the water level dropping more than usual lately.

I always thought concrete was completely waterproof, but now I'm wondering if that's actually true. Can pool water actually leak through the concrete shell itself? I'm worried about what this might mean for water quality and whether it's safe for the kids to keep swimming if there are structural issues with the concrete.…more

Read answer

Leaks Medium 2-4 hours for inspection and testing 354 👍 0

Can Pool Leak Through Tile Grout? Detection Guide

Woke up to my pool losing another 3 inches this week from my 20,000-gallon inground. I've checked all the obvious spots like the skimmer, return lines, and pump connections, but haven't found any obvious leaks.

What's got me wondering about the grout is that I've noticed some areas where it looks cracked or slightly deteriorated, especially on the north side of the pool where we get the most freeze-thaw action during winter. The tile and grout are probably 8-10 years old now. My water chemistry has been pretty stable - chlorine around 2-3 ppm, pH 7.4, alkalinity 120 ppm - so I don't think chemical imbalance is causing rapid deterioration.

Is it actually possible for pool water to leak through damaged grout at the waterline? I'm trying to figure out if I should focus my leak detection efforts there or keep looking elsewhere. The water level seems to stabilize when it drops below the tile line, which makes me think the grout theory might be on the right track.…more

Read answer

Leaks Medium 2-4 hours 334 👍 0

Can Pool Leak Through Hydrostatic Valve? Detection & Repair

According to my pool's behavior, the water level started dropping steadily yesterday even though nobody's been swimming, and now I'm wondering if the hydrostatic valve is leaking. The water level drops consistently even when the pool isn't in use, and I've already ruled out obvious surface leaks around the skimmers, returns, and visible plumbing.

From my understanding, hydrostatic valves are designed to prevent the pool shell from floating during high groundwater conditions, but I'm wondering if they can work in reverse - allowing pool water to escape when groundwater levels are low or if the valve mechanism fails. The water loss seems to correlate with our recent dry spell, which has me questioning whether the valve could be stuck open or damaged.

Is it technically feasible for a hydrostatic valve to cause pool water leakage, and if so, what specific failure modes should I be looking for during inspection?…more

Read answer

Leaks Medium 2-4 hours for detection, varies for repair 170 👍 0

How to Find and Fix Pool Leaks: Complete Guide

Between my wife's daily pool checks and my denial, she finally made me face the reality that our 2009 inground concrete pool is losing 2-3 inches every single day. It's not evaporation - we've had normal temperatures and humidity here in Ohio. I noticed some wet spots around the equipment pad yesterday, and there's a small crack I can see near the shallow end steps that wasn't there last season. The water level seems to stabilize when it gets down to just below the skimmer opening. I'm not sure if this is a plumbing leak, structural issue, or equipment problem. What's the best way to figure out where this leak is coming from and get it fixed?…more

Read answer

Product Ranking 8 compared

Best Salt Chlorine Generators

4.3 (6,200 reviews)

Leaks Easy 45 minutes (including cure time: 1-2 hours) 6 👍 0

J-B Weld WaterWeld on Leaking Pool PVC Joint

During the estimate call, my pool guy quoted me close to $200 to cut out and re-plumb a leaking glued PVC joint right at my pump — and honestly that feels steep for what looks like a tiny weeping drip. I picked up a stick of J-B Weld WaterWeld (the 8277 epoxy putty) at Home Depot for about nine bucks, and I'm wondering if I can just knead it up and pack it around that joint myself instead of paying someone else to do it.

My main questions are: will this stuff actually hold against the water pressure a pool pump puts out, and do I need to completely shut the system down and dry the pipe before applying it? I know it says 'cures underwater' on the package, but I want to make sure I'm not just wasting my time with a fix that'll blow off the minute I fire the pump back up.

Is this a real repair I can count on, or am I just buying myself a little time before I have to do the full re-glue job anyway? Happy to do the proper fix eventually, but if this buys me a season I'm all for it.…more

Read answer

Leaks Medium 30 minutes to 2 hours 284 👍 0

Can Pool Leaks Be Fixed? Complete Repair Guide 2026

Got a pool that keeps losing water with exposed equipment around the edges — is this dangerous with kids constantly playing in the yard? I've tried those DIY leak detection methods I found online but honestly can't tell if it's the liner, the plumbing, or something else entirely.

Before I throw in the towel and call it quits on pool ownership, I need to know - can pool leaks actually be fixed for good? I don't want some temporary band-aid solution that'll fail again next season. Are there reliable repair methods that will solve this nightmare once and for all, or am I just fooling myself thinking this can be permanently resolved?…more

Read answer

Pump Problems Easy 15 minutes 257 👍 0

How to Tell if Your Pool Pump Isn't Working Properly

This 4-year-old pool pump is turning my once-crystal-clear water cloudy and stagnant — is it worth repairing or should I just replace the whole thing? I'm not super technical when it comes to pool equipment, so I'm not sure what warning signs I should be watching for.

What are the telltale signs that indicate my pump isn't doing its job properly? I want to catch any problems before they turn into expensive repairs or leave me with a swamp instead of a swimming pool!…more

Read answer

Heaters Hard Professional installation required 1,135 👍 27

Can Pool Heater and Pump Share Same Circuit? Info Guide

Finally it's midnight and my pool heater tripped the breaker for the third time tonight — desperately need to know if wiring both heater and pump together is causing this mess. The pool store is pushing me to hire their electrician for thousands of dollars, but I'm handy with electrical work and want to do this myself if possible.

Before I start running wiring, I need to know if there are any safety issues with putting both the heater and pump on one circuit. They're both major electrical components so I want to make sure I'm not creating a fire hazard or code violation. Anyone have experience with DIY pool electrical work?…more

Read answer

Loading more Q&A...

You've seen all 25 Q&A articles!