Results for "pool automation"

Equipment Easy 30 minutes 237 👍 0

Do I Need an Automatic Pool Cleaner? Complete Guide 2026

Noticed my 18,000-gallon inground pool still looks like a swamp after following every YouTube DIY cleaning tutorial for weeks. Currently managing manual vacuuming twice weekly, but considering automation to improve efficiency and reduce maintenance time commitment.

My pool experiences moderate debris load from surrounding oak trees, particularly during fall months. Weekly chemical balancing is consistent, but manual cleaning consumes approximately 90 minutes per session. Budget allows for mid-range robotic or suction-side units.

What specific factors should determine whether automatic cleaning systems provide sufficient return on investment? Looking for technical analysis of pool size thresholds, debris management capabilities, and operational cost considerations.…more

Read answer

Equipment Medium 2–3 hours (plus cure time) 1,048 👍 45

Add a Shutoff Valve to Your Pool Waste Line

My pool equipment pad has a waste line that just dumps straight out to the side yard with zero control — no valve, nothing. I found a YouTube tutorial on how to splice in a shutoff valve, grabbed the supplies, and cut into the pipe... and now I've got a bigger mess than before. The dry-fit didn't hold the way the video showed, one of my cuts came out slightly angled, and I'm second-guessing the whole thing before I actually glue anything permanently.

The waste line is 1½-inch PVC coming off the back of my multiport filter valve. It dribbles between backwash cycles because there's nothing shutting it off, and I'd like to fix that properly. I want to understand what type of valve to actually use here, how to prep the pipe ends correctly after a rough cut, and how to solvent-weld everything so it doesn't leak or blow apart under pressure.

Can someone walk me through the real process — choosing the right valve, making clean cuts, dry-fitting, priming and cementing, and how long I need to wait before firing the pump back up? I want to get this right the second time.…more

Read answer

Pump Problems Medium 2 hours 552 👍 0

Does Variable Speed Pool Pump Need Timer? Complete Guide

Looked outside this morning and my variable speed pump is cycling on and off randomly throughout the day without any timer system programmed. My kids swim every day after school and I want to make sure the water is always properly circulated and filtered for their safety.

The pump has its own programming features, but I'm concerned about what happens if something goes wrong with the built-in controls. Would having a backup timer give me better peace of mind and help ensure the pool stays clean and safe? I just want to make sure I'm not missing anything that could affect water quality when my children are swimming.…more

Read answer

Editor's Pick

Dolphin Nautilus CC Plus Robotic Pool Vacuum (2026)

Wall-climbing scrubber brush and Wi-Fi control — ideal for in-ground pools up to 40 ft. View on Amazon →

Sponsored

Pump Problems Medium 15-30 minutes 546 👍 0

How to Reset Pentair Variable Speed Pool Pump - Complete Guide

Pulled into my driveway after work and realized our Pentair variable speed pump is throwing constant error messages with Saturday's pool party just days away. It keeps throwing error codes and the speeds seem all wonky - like it's not responding to the programmed settings at all. I've tried adjusting the speed programs but nothing seems to stick.

I'm hoping a good reset might fix this mess before I have to call a tech out. I know there's got to be a way to do a complete system reset on these things, but I want to make sure I do it right. What's the proper procedure to fully reset one of these pumps and get it back to working normally?…more

Read answer

Filters Easy 15 minutes 384 👍 1

Can I Leave My Pool Filter On All The Time? Complete Guide

About to run my pool filter 24/7 this summer. Currently I'm running my filter system about 6 hours per day, but I've been dealing with some water clarity issues despite maintaining proper chlorine levels (2.5 ppm) and balanced pH (7.4). My pool gets heavy use from my family and I've noticed the water looks a bit cloudy by evening even after shocking. I'm wondering if I should just leave the filter running continuously to help with circulation and keep the water crystal clear, or if there's a sweet spot for daily runtime that balances effectiveness with energy costs. The pool is in full sun most of the day and we're in a fairly warm climate, so I want to make sure I'm getting adequate turnover without unnecessarily driving up my electric bill.…more

Read answer

Pump Problems Medium 15 minutes reading 355 👍 0

How Variable Speed Pool Pumps Work - Complete Guide

Woke up to another $400 electric bill after replacing my pool filter, cleaning the skimmer baskets, checking all the connections — my single-speed pump is still draining my wallet on this 20,000-gallon inground pool. My utility bills have been astronomical running the pump 8-10 hours daily, and I'm trying to understand exactly how these newer pumps achieve such significant energy savings.

Specifically, I'd like to know what type of motor technology variable speed pumps use and how they're able to adjust their speed so precisely. My current pump seems to be either on full blast or off completely. What's the RPM range these variable speed units can operate in, and how does that translate to better flow control and lower energy costs? I want to make sure I understand the technology before investing in what seems like a more expensive upfront purchase.…more

Read answer

Pump Problems Medium 45 minutes 350 👍 0

Do I Need a New Pool Pump? Signs & Replacement Guide

Spent three hours getting completely different advice about my 9-year-old pool pump—neighbor says it just needs cleaning, pool store wants to sell me a replacement, and YouTube's giving me five conflicting solutions. It's making some grinding noises when it starts up, and I noticed a small puddle of water forming near the motor housing after it runs. The pump still seems to be circulating water and maintaining decent flow, but I'm worried these issues might get worse.

I got a quote from a local pool service company and they said repairs would cost around $350, while a new comparable pump would run about $600-700 installed. The pump has been reliable overall, but I'm wondering if I should just bite the bullet and replace it now, or if these are minor issues that are worth fixing. What are the key signs that indicate it's time for a full replacement rather than trying to repair an aging pump?…more

Read answer

Installation Medium 2-4 hours research 270 👍 0

Inground Pool Costs: Complete Installation Price Guide 2026

Apparently planning to tackle our inground pool installation this spring — what should I have budgeted and ready before contractors start calling back? Some contractors are quoting us wildly different amounts and I can't tell what's reasonable.

I know there are different types of pools - concrete, vinyl liner, and fiberglass - but I have no idea which offers the best value for a family with young children. We want something safe and durable that won't break the bank, but we also don't want to cut corners on quality when it comes to our kids' safety.

Can someone break down what I should realistically expect to spend on each type of inground pool? I just want to make sure we're budgeting appropriately and not getting taken advantage of by contractors.…more

Read answer

Winterizing Medium 2-3 hours 237 👍 0

Do You Need to Cover Pool Equipment? Winterizing Guide

Last winter I didn't cover anything and ended up with a cracked pump housing that cost me $400 to replace - apparently freeze damage is no joke.

This year I want to be smarter about it. I've got the usual setup - pump, heater, control panel, filter system. Do I really need to buy covers for all this equipment, or am I being paranoid? I keep reading conflicting advice online and I just want to protect my investment without going overboard on unnecessary gear.…more

Read answer

Cloudy Water Medium 2-5 days 2,658 👍 1

How to Clear Cloudy Pool Water: Complete Step-by-Step Guide

Pulled off a perfect shock treatment on my old above-ground pool for this exact cloudy water mess, but my new inground pool still looks like milk. I can barely see the bottom and it's honestly embarrassing with summer parties coming up.

I'm pretty sure I need to do something with the chemicals and maybe run the filter more, but I have no idea what the right steps are or how long this is going to take. Should I be testing the water first? Adding chlorine? Help me get my pool back to that beautiful clear blue!…more

Read answer

Salt Water Medium 45 minutes 1,334 👍 2

How Salt Water Pool Systems Work: Complete Guide 2026

Despite my pool guy insisting I need to understand salt water electrolysis to maintain my system, his overly technical explanation makes me think he's overcomplicating things.
Specifically, what happens at the cellular level when salt water passes through the system? How does dissolved sodium chloride get converted into an effective sanitizing agent, and what role does electrolysis play in this conversion process? I want to grasp the complete operational mechanism before investing in this technology.…more

Read answer

Product Ranking 8 compared

Best Pool Lights

4.5 (19,800 reviews)

Salt Water Medium 2-5 days depending on severity 647 👍 1

Do Salt Water Pools Get Algae? Prevention & Treatment Guide

Converted to salt water two seasons ago and thought algae would be a thing of the past. Woke up last Tuesday to green patches forming on the shallow end walls despite my salt cell running full blast. Starting to wonder if salt pools are really as algae-proof as everyone claims.…more

Read answer

Maintenance Medium 2-8 weeks 387 👍 0

Do You Need Approval for a Pool? Permits & Requirements Guide

Planning to drop $15K+ on a 16x32 inground pool but worried about hidden permit costs and legal hoops I haven't budgeted for yet.

I've heard that most pool installations require various permits, but I'm not sure exactly what's needed or how the process works. Do I need building permits? What about electrical work permits since we'll need new wiring for the pump and lighting? Are there specific inspections that have to happen during construction?

I want to make sure I do everything by the book and stay compliant with local regulations. What's the typical approval process like, and are there any requirements I might be overlooking? I'm located in a suburban area if that makes a difference for the regulations.…more

Read answer

Pump Problems Medium 30 minutes 386 👍 0

How to Program Variable Speed Pool Pump - Complete Guide

Nobody warned me that after the pool guy installed my new variable speed pump yesterday, I'd be staring at this digital display like it's speaking ancient Greek. The installer basically ran off after hooking it up and now I'm supposed to figure out how to program different speeds throughout the day.

I get that I'm supposed to run it at different RPMs at different times to save energy, but honestly have no clue where to start. Like, what speeds should I use and when? And how do I actually punch this stuff into the control panel? My old single-speed pump was so much simpler - just flip the switch and forget about it!…more

Read answer

Equipment Medium 45 minutes 380 👍 0

Do Variable Speed Pool Pumps Run All The Time? Complete Guide

Apparently my pool guy wants $800 to install a variable speed pump that he claims runs 24/7, but I'm skeptical about whether that's really necessary. I'm particularly interested in understanding how they balance filtration requirements with energy efficiency, and whether the speed modulation eliminates the need for complete shutdown periods during normal operation.…more

Read answer

Loading more Q&A...

You've seen all 25 Q&A articles!