The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Pool filters come in three main types: sand filters (low maintenance, 5-7 year lifespan), cartridge filters (easy cleaning, 1-2 year replacement), and DE filters (finest filtration, requires backwashing every 4-6 weeks).
To fix low stabilizer, add cyanuric acid at 1 pound per 10,000 gallons to raise CYA by 10ppm. For high levels over 80ppm, partially drain and refill your pool, as there's no chemical way to lower stabilizer.
Salt water pools use electrolysis to generate chlorine from dissolved salt, requiring proper water chemistry balance including pH, alkalinity, and CYA levels. They still need regular maintenance and chemical adjustments despite producing their own chlorine.
Pool pumps require regular maintenance and troubleshooting to operate efficiently. Common issues include low water flow, unusual noises, and electrical problems that can often be resolved with proper diagnosis and maintenance.
Running a pool pump off an extension cord is extremely dangerous and not recommended. Pool pumps require dedicated electrical circuits with GFCI protection for safety.
Pool salt cells use electrolysis to convert dissolved salt (sodium chloride) into chlorine gas and sodium hydroxide. The chlorine sanitizes your pool while the sodium hydroxide raises pH, creating a continuous chlorination cycle.
Most salt water pool cells can be rebuilt by replacing the titanium plates and internal hardware, typically costing 50-70% less than a new cell. However, rebuilding is only worthwhile if the cell housing is intact and you have technical skills.
To backwash a pool filter, turn off the pump, set the multiport valve to BACKWASH, turn the pump back on for 2-3 minutes until water runs clear, then switch to RINSE for 30 seconds before returning to FILTER mode.
A properly winterized pool can stay closed for 6-8 months safely, while emergency closures should be limited to 2-4 weeks maximum. Beyond these timeframes, water chemistry deterioration and equipment damage risks increase significantly.
Yes, saltwater pools absolutely need cyanuric acid (stabilizer) to protect the chlorine generated by the salt cell from UV degradation. Maintain CYA levels between 70-80 ppm for optimal protection.
Pool heaters are built to withstand moisture and humidity but should be protected from direct rain, flooding, and submersion. Proper installation with adequate clearances and covers ensures safe operation and longevity.
Pool filter lifespan depends on the type: cartridge filters last 1-2 years, sand filters last 5-7 years, and DE filters last 8-10 years. Replace when cleaning becomes ineffective or damage occurs.
Salt water pools still require chemicals for proper water balance, including pH adjusters, stabilizer, and calcium hardness increasers. The salt chlorine generator only produces chlorine, not other essential chemicals needed for safe swimming water.
Clear cloudy pool water by testing and balancing chemicals first, then shock with liquid chlorine to 2-3x your stabilizer level, run the filter 24/7, and backwash frequently until water clears completely.
