Results for "scale"

Water Chemistry Medium 1,172 👍 64

Calcium Hardness Too High But My Fill Water Is Just As Hard

During my last water test, my calcium hardness came back at somewhere around 600 ppm, which I know is way above the recommended range of 200–400 ppm. The frustrating part is that my tap water tests at nearly the same hardness level, so draining and refilling the pool doesn't seem like it would actually help — I'd basically just be starting back at square one with equally hard water. Everything I've read says to partially drain and dilute, but when the numbers on my fill water don't add up to any real improvement, that solution seems pointless.

I'm in a region where hard water is just a fact of life, and I can't find a clear answer on what chemical treatments actually lower calcium hardness directly in the pool. Is there something I'm missing here, or am I stuck just managing the problem rather than fixing it?…more

Read answer

Salt Water Medium 45 minutes 405 👍 0

Do Saltwater Pools Need Calcium? Complete Guide to CH Levels

Tried everything I can think of, but why does my saltwater pool keep destroying my salt cell and corroding my heater elements while making the surface look rough? I've been obsessing over chlorine and pH levels, but maybe I'm missing something obvious?

A friend mentioned calcium hardness might be the culprit, but I honestly have no idea what levels saltwater pools need. I know regular pools need calcium, but does the salt system change things? And if my calcium is off, could that really be why my expensive equipment keeps failing? I'm hoping there's a simple fix here because I'm tired of replacing parts every few months.…more

Read answer

Water Chemistry Medium 45 minutes 889 👍 0

Do Pools Need Calcium? Complete Hardness Level Guide

Noticed my 15,000 gallon inground pool is still etching the plaster walls even though pH and chlorine levels are perfectly balanced. Have a plaster pool and not sure what levels to target. Also curious if vinyl and fiberglass pools need different ranges.

What happens if calcium gets too low? Will it damage my equipment or pool surface?…more

Read answer

Editor's Pick

Dolphin Nautilus CC Plus Robotic Pool Vacuum (2026)

Wall-climbing scrubber brush and Wi-Fi control — ideal for in-ground pools up to 40 ft. View on Amazon →

Sponsored

Water Chemistry Medium 45 minutes 222 👍 0

Does My Pool Need Calcium Hardness? Essential Guide

Called the pool store about my new place and they're saying my calcium hardness levels from March's water test are completely out of whack. For the past three years, I've been diligent about testing chlorine, pH, and alkalinity weekly using test strips, but I've never paid attention to calcium hardness levels. My pool store mentioned it during my last water analysis visit in March, but I honestly wasn't sure if it was just an upsell.

Recently, I've noticed some minor scaling around the waterline tiles and my pool cleaner seems to be working harder than usual. The pool is located in Phoenix, Arizona, so we deal with hard water from the tap and intense evaporation during summer months. I top off the water about twice a week during peak season. Should calcium hardness be something I'm actively managing, or is it less critical for fiberglass pools compared to plaster finishes?…more

Read answer

Water Chemistry Easy 15 minutes 865 👍 0

How to Test Pool Stabilizer (CYA) Levels: Complete Guide

Called three different pool repair companies for advice on my stubborn chlorine levels, followed their suggestions exactly, but somehow made my pool chemistry even worse — now I'm wondering if my cyanuric acid is completely out of whack.

I've never actually tested for stabilizer before - I didn't even know it was something I needed to check regularly! What's the most accurate way to test cyanuric acid levels? Are there different testing methods, and do some work better than others? I want to make sure I'm getting reliable readings before I start messing with chemical adjustments again.…more

Read answer

Water Chemistry Medium 2-4 hours 2,295 👍 0

Do Vinyl Pools Need Calcium? Complete CH Guide 2026

Before our big pool party this Saturday, I'm getting completely contradictory advice about whether my vinyl pool even needs calcium added! I keep reading conflicting info online - some sources say vinyl pools don't need calcium at all, others say they do but at different levels than concrete pools. My test strips show I'm sitting around 100 ppm right now and I'm not sure if that's too low or if I even need to worry about it.

I've been dealing with some metal staining on my vinyl liner and wondering if low calcium could be making it worse by causing corrosion. But I'm also terrified of adding too much and ending up with scaling or that dreaded cloudy water that takes forever to clear up. What's the sweet spot for calcium hardness in vinyl pools, and is it really different from other pool types?…more

Read answer

Water Chemistry Medium 15-20 minutes 405 👍 2

Hot Tub & Spa Water Care Guide: Complete Chemistry Manual 2026

Hot tub water care requires maintaining proper pH (7.4-7.6), alkalinity (80-120 ppm), and sanitizer levels while following regular testing and chemical adjustment schedules. Higher temperatures and smaller water volumes make spas more sensitive to chemical imbalances than pools.…more

Read answer

Salt Water Easy 30 minutes 726 👍 0

How to Clean Pool Salt Cell - Remove Calcium Buildup Fast

I looked forward to pool season all winter, but every spring when I fire up my salt chlorinator, the same calcium buildup destroys my chlorine output. The cell has been operating for several months and I'm noticing reduced chlorine output, which typically indicates mineral buildup on the plates.

What's the standard procedure for safely cleaning these deposits? I have muriatic acid available but want to confirm the proper dilution ratio and contact time to effectively dissolve the calcium without damaging the cell components. Also need to verify the correct safety steps for power shutdown and cell removal before beginning the cleaning process.…more

Read answer

Water Chemistry Medium 2-4 hours 309 👍 0

Can Pool pH Be Too High? Problems & How to Lower It

Between my pool test strips screaming dangerously high pH and my kids' eyes burning like fire every swim, something's definitely not adding up here. I tested it yesterday and it's reading around 8.0, which seems higher than normal. The water also looks a bit cloudy even though I've been adding chlorine regularly.

I'm concerned about whether it's safe for the kids to keep swimming. What problems does high pH actually cause, and how can I bring it down safely? I want to make sure the water quality is good before they get back in the pool.…more

Read answer

Filters Easy 3-4 hours including soak time 436 👍 0

Can You Clean Pool Filters with Vinegar? Complete Guide

Looked at my pool filter after buying my first house and honestly have zero clue if I need some expensive cleaner or if vinegar works. My cartridge filter has some white buildup on it that looks like calcium deposits, and I've heard people mention using vinegar as a cleaner around the house.

Is it safe to clean pool filters with vinegar? If so, how would I go about doing it? The pool store mentioned something about different types of filters having different cleaning methods, so I want to make sure I don't damage anything. Any guidance would be really appreciated!…more

Read answer

Maintenance Easy 5 minutes 423 👍 0

Pool Glossary: SLAM, Sanitizer, PSI, CYA & Common Pool Terms

I keep seeing pool terms and abbreviations like SLAM, CYA, FC, PSI, sanitizer, backwash, and shock. What do they mean in plain English?…more

Read answer

Product Ranking 8 compared

Best Variable Speed Pool Pumps

4.5 (12,400 reviews)

Heaters Medium 15 minutes reading 511 👍 0

How Long Do Pool Heaters Last? Complete Lifespan Guide

Standing next to my ancient pool heater that's been making weird noises, is it dangerous to keep running it another season with kids constantly using our 20,000-gallon inground pool?

From what I've researched, there seem to be pretty significant differences in how long each type lasts, but I'm getting conflicting information. Some sources say gas heaters burn out faster due to the combustion process, while others claim electric units fail sooner because of the heating elements. I'm also curious about heat pumps since they're more energy efficient, but I wonder if that translates to longer equipment life.

What should I realistically expect in terms of lifespan for each heater type? I'm willing to do proper maintenance and won't be running it constantly - probably just weekends and evenings during swimming season. Are there specific factors that significantly impact how long these units last?…more

Read answer

Salt Water Medium 30 minutes 346 👍 0

Do Salt Water Pools Need Chemicals? Complete Guide

Our saltwater pool area reeks of that sharp chlorine smell every morning, which seems impossible since we were told these systems are basically chemical-free.

But now I'm reading conflicting information online. The pool store told me I'd still need to buy some chemicals, but I'm confused about what exactly. I thought the salt system was supposed to handle everything? What chemicals do salt water pools actually need, and why? I want to make sure I'm taking proper care of the pool and keeping the water safe for my family.…more

Read answer

Filters Easy 2–3 hours (including soak time) 84 👍 1

How to Deep Clean a Pool Cartridge Filter

Nobody tells you how fast sunscreen and body oils can clog up a cartridge filter. My pressure gauge has been creeping up steadily, and when I finally pulled the cartridges out, the pleats looked genuinely gunky — not just dusty, but greasy and discolored even after I sprayed them down with the garden hose. A neighbor suggested soaking them in Simple Green since it's a degreaser, but I'm nervous about it foaming up my pool water if I don't rinse it out completely.

My current routine is basically just a garden hose spray-down every few weeks, but clearly that's not cutting through the oils and sunscreen buildup. I want to know the full proper process — the right way to hose them down, whether Simple Green or a dedicated pool filter cleaner is the smarter choice, how to handle mineral scale versus greasy residue differently, and how often a real deep clean should actually happen.

Also, someone in my neighborhood group mentioned using a pressure washer to blast the pleats clean, and now I'm second-guessing everything. What should I absolutely avoid doing, and what's the correct method from start to finish?…more

Read answer

Salt Water Easy 30 minutes 1,290 👍 0

How to Know If Your Pool Salt Cell is Working - 7 Easy Tests

About to sound totally clueless here, but with my salt levels perfect at 3000-4000 ppm, how do I know my salt cell is actually producing chlorine?

What specific visual and chemical indicators should I be monitoring to determine if the salt cell is generating adequate chlorine output? I'm looking for concrete testing methods and observable signs that will definitively show whether the electrolytic process is functioning correctly or if the cell requires maintenance or replacement.…more

Read answer

Loading more Q&A...

You've seen all 95 Q&A articles!