The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Pool opening involves removing winter covers, inspecting equipment, reconnecting plumbing, and balancing water chemistry. Start with equipment inspection, fill and reconnect systems, then shock and balance chemicals before swimming.
Pool leaks can occur in the shell, plumbing, or equipment and are detected using bucket tests, dye tests, and pressure testing. Most minor leaks can be DIY repaired, but structural damage requires professional assessment.
Pool heaters can fail due to electrical issues, gas problems, water flow restrictions, or component failures. Most common issues like pilot light problems, low water flow, and thermostat malfunctions can be diagnosed and often fixed without professional help.
It appears you may have asked about airline miles by mistake when looking for pool maintenance help. This comprehensive guide covers common pool issues and maintenance procedures to get your pool water crystal clear and properly balanced.
Most salt water pool cells can be rebuilt by replacing the titanium plates and internal hardware, typically costing 50-70% less than a new cell. However, rebuilding is only worthwhile if the cell housing is intact and you have technical skills.
Pool heaters are built to withstand moisture and humidity but should be protected from direct rain, flooding, and submersion. Proper installation with adequate clearances and covers ensures safe operation and longevity.
Clear cloudy pool water by testing and balancing chemicals first, then shock with liquid chlorine to 2-3x your stabilizer level, run the filter 24/7, and backwash frequently until water clears completely.
Clear cloudy pool water by testing and balancing your chemistry first, then shock with liquid chlorine to 3x your CYA level and run your filter 24/7 until the water clears completely.
Yes, you can swim during your period safely. Proper menstrual protection and maintaining balanced pool chemistry ensure hygiene and comfort for all swimmers.
Your pool pump isn't working properly if you notice weak water flow, unusual noises, air bubbles in return lines, high pressure readings, or the pump running but not circulating water.
Yes, you can leave your pool filter running continuously, and it's actually beneficial for water clarity and chemical distribution. However, running it 8-12 hours daily is usually sufficient for most pools while saving energy costs.
Cloudy pool water doesn't necessarily mean algae - it can be caused by poor filtration, chemical imbalances, or early algae growth. Proper testing and diagnosis will reveal the true cause.
Yes, pools can leak through tile grout when it becomes cracked, deteriorated, or improperly sealed. Grout leaks typically occur at the waterline where freeze-thaw cycles and chemical exposure weaken the grout over time.
Yes, pool leaks can potentially cause sinkholes by washing away soil around your pool's foundation. While rare, continuous water leakage can erode the soil structure, creating voids that may eventually collapse into sinkholes.
