Pool water chemistry involves maintaining proper levels of chlorine (1-3ppm based on CYA), pH (7.4-7.6), alkalinity (60-120ppm), and calcium hardness (250-350ppm for plaster). Regular testing with quality kits and proper chemical dosing ensures safe, clear water.
The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Wait 24-48 hours after shocking your pool before adding algaecide, allowing chlorine levels to drop below 5 ppm. Test your water first to ensure proper chemical balance and maximum algaecide effectiveness.
Pool filters come in three main types: sand filters (low maintenance, 5-7 year lifespan), cartridge filters (easy cleaning, 1-2 year replacement), and DE filters (finest filtration, requires backwashing every 4-6 weeks).
To fix low stabilizer, add cyanuric acid at 1 pound per 10,000 gallons to raise CYA by 10ppm. For high levels over 80ppm, partially drain and refill your pool, as there's no chemical way to lower stabilizer.
Above ground pools require proper installation on level ground, regular liner maintenance (lasting 6-10 years), and balanced water chemistry with chlorine levels based on CYA. This comprehensive guide covers everything from DIY installation to winterization and troubleshooting common issues.
Yes, most pool owners need pH Up and pH Down chemicals to maintain the ideal pH range of 7.4-7.6, but you may not need both products depending on your water's natural tendencies.
Pool pumps require regular maintenance and troubleshooting to operate efficiently. Common issues include low water flow, unusual noises, and electrical problems that can often be resolved with proper diagnosis and maintenance.
Most pools don't need algaecide if you maintain proper chlorine levels (2-5ppm FC) and adequate CYA (30-50ppm). Algaecide is mainly useful for prevention during high-risk periods or as backup insurance, not for treating active algae blooms.
Yes, you can use pool pH increaser in your spa since both use sodium carbonate (soda ash) as the active ingredient. However, you'll need to adjust dosing for your spa's smaller volume and retest after 30 minutes.
To raise pool pH, add sodium carbonate (soda ash) for quick increases or sodium bicarbonate (baking soda) for gradual increases. Test first, calculate dosage based on pool size, and add chemicals slowly with circulation running.
Pool salt cells use electrolysis to convert dissolved salt (sodium chloride) into chlorine gas and sodium hydroxide. The chlorine sanitizes your pool while the sodium hydroxide raises pH, creating a continuous chlorination cycle.
It appears you may have asked about airline miles by mistake when looking for pool maintenance help. This comprehensive guide covers common pool issues and maintenance procedures to get your pool water crystal clear and properly balanced.
Most salt water pool cells can be rebuilt by replacing the titanium plates and internal hardware, typically costing 50-70% less than a new cell. However, rebuilding is only worthwhile if the cell housing is intact and you have technical skills.
Disney generally prohibits pool hopping between resorts, but guests can use pools within their resort category and some exceptions exist for dining reservations and specific resort partnerships.
