Most Las Vegas pools operate year-round due to the desert climate, with peak season from May through October. Many commercial pools and resorts stay open 24/7 during peak months, while residential pools typically benefit from heating systems November through March.
Pool opening involves removing winter covers, inspecting equipment, reconnecting plumbing, and balancing water chemistry. Start with equipment inspection, fill and reconnect systems, then shock and balance chemicals before swimming.
Pool leaks can occur in the shell, plumbing, or equipment and are detected using bucket tests, dye tests, and pressure testing. Most minor leaks can be DIY repaired, but structural damage requires professional assessment.
Pool winterization involves balancing chemicals, protecting equipment, and proper closing procedures. The process varies by climate zone but typically includes shocking, lowering water levels, and winterizing plumbing to prevent freeze damage.
Pool heaters can fail due to electrical issues, gas problems, water flow restrictions, or component failures. Most common issues like pilot light problems, low water flow, and thermostat malfunctions can be diagnosed and often fixed without professional help.
Salt water pools use electrolysis to generate chlorine from dissolved salt, requiring proper water chemistry balance including pH, alkalinity, and CYA levels. They still need regular maintenance and chemical adjustments despite producing their own chlorine.
Running a pool pump off an extension cord is extremely dangerous and not recommended. Pool pumps require dedicated electrical circuits with GFCI protection for safety.
Pool heaters and pumps should never be on the same circuit due to high amperage requirements that would overload the circuit and create safety hazards.
Pool heaters are built to withstand moisture and humidity but should be protected from direct rain, flooding, and submersion. Proper installation with adequate clearances and covers ensures safe operation and longevity.
Pool heating time depends on heater type, pool size, and temperature difference. Gas heaters typically raise temperature 1-2°F per hour, while heat pumps achieve 3-5°F per hour on smaller pools.
Yes, you should cover your pool heater in winter if it's not being used, especially for heat pumps and electric heaters. Gas heaters typically need less protection but benefit from covers in harsh climates.
Variable speed pool pumps use permanent magnet motors and electronic controls to adjust RPM from 600-3450, providing precise flow control and significant energy savings compared to single-speed pumps.
You should not add salt to a regular chlorine pool without a saltwater system. Salt will not provide sanitization and can damage pool equipment while creating water balance issues.
Solar pool heaters work by circulating pool water through dark collectors that absorb solar energy and transfer heat to the water. The heated water returns to your pool through a system of pumps, valves, and controllers.
Most states don't require a license for basic pool cleaning services, but commercial pool service businesses may need business licenses or permits. Chemical handling and pool maintenance involving equipment repairs often have additional requirements.
