Results for "gasket replacement"

I noticed my pool light stopped working this morning and want to fix it without draining the pool. Can I replace the bulb or entire fixture underwater, and what's involved?…more

Wondering if I should be concerned about water pooling around the light fixture in this rental's inground pool since I've never dealt with pool lights before. My pool has been losing water steadily for months now, and I've checked everything I can think of - the skimmer, return lines, you name it. But I just noticed the water level seems to drop more when the pool light is on, and there's some discoloration around the light fixture.

Is it actually possible for pool lights to leak? I never even considered this could be the source of my problem. If they can leak, what parts typically fail and how much water are we talking about? I'm really hoping this might finally be the answer to my water loss mystery!…more

I turned to a second opinion after my pool contractor quoted $3,000 to replumb my entire return system when I suspect these leaking jets might just need a simple repair. I keep losing water and can't pinpoint where it's going. The jets seem like the obvious suspect since they're these openings in the wall, but I honestly have no clue how they're put together or what could go wrong with them.

Is it even possible for the actual jets to leak? And if so, where would the leak typically happen - like around the edges where they meet the pool wall, or somewhere else entirely?…more

Found myself doing my annual spring pool prep when my old pump decided to kick the bucket, and now I'm wondering if I can tackle replacing this beast myself. I have basic electrical experience from working on household circuits and own standard tools, but I've never worked on pool equipment before.

What level of technical knowledge is required for pump replacement? Are there specific electrical or plumbing connections that typically cause problems for DIY installers? I'm trying to determine if this is within my skill range and get a realistic estimate of the time commitment involved.…more

Apparently my pool filter started shooting dirty water back into the pool during what I thought was a normal backwash cycle yesterday.

The pool store told me I need to backwash my filter regularly, but I'm honestly not sure what that means or how to do it properly.

I see there's a multiport valve on my filter system with different settings like BACKWASH, RINSE, and FILTER, but I don't want to mess anything up by doing it wrong. Can someone walk me through the exact steps? Like do I turn the pump off first, and how long am I supposed to run it in each mode?…more

According to my pool's behavior, the water level started dropping steadily yesterday even though nobody's been swimming, and now I'm wondering if the hydrostatic valve is leaking. The water level drops consistently even when the pool isn't in use, and I've already ruled out obvious surface leaks around the skimmers, returns, and visible plumbing.

From my understanding, hydrostatic valves are designed to prevent the pool shell from floating during high groundwater conditions, but I'm wondering if they can work in reverse - allowing pool water to escape when groundwater levels are low or if the valve mechanism fails. The water loss seems to correlate with our recent dry spell, which has me questioning whether the valve could be stuck open or damaged.

Is it technically feasible for a hydrostatic valve to cause pool water leakage, and if so, what specific failure modes should I be looking for during inspection?…more

Woke up to a dead salt cell again — thing works flawlessly when it's under 85 degrees but won't generate a drop of chlorine once we hit the 90s. A local pool tech mentioned that these cells can sometimes be rebuilt by replacing the internal titanium plates, which would cost significantly less than buying a brand new unit.

I'm worried about whether a rebuilt cell would be as reliable and safe for my kids as a new one. The housing on our current cell looks fine, no cracks or damage that I can see. Has anyone had experience with rebuilding salt cells? I want to make sure we're not compromising water quality or safety just to save money. What should I consider before deciding between rebuilding versus replacing entirely?…more

Found out from my wife that our pool filter pressure gauge has been stuck at a weirdly low 6-7 PSI all week and now I can't stop obsessing over it. My 20,000 gallon inground pool has been running fine otherwise, but I'm wondering if this low pressure is something I should be concerned about.

I've heard people talk about high filter pressure being bad, but nobody ever mentions if pressure can be too low. The pump seems to be running, but I'm not sure if the water flow looks as strong as it used to be. Water chemistry has been balanced - chlorine at 2.5 ppm, pH at 7.4, and alkalinity at 110 ppm. Should I be worried about this low pressure reading, and what could be causing it?…more