Results for "calcium hardness"

Water Chemistry Easy 15 minutes 187 👍 1

Does Calcium Hardness Increaser Expire? Storage Tips

Since I'm standing in my garage staring at this container of calcium chloride powder from last season, I'm wondering if this stuff actually goes bad or if I can still use it to raise my pool's calcium hardness levels. It's been sitting in my garage through the winter in the original container. I'm getting ready to open the pool again and wondering if this stuff goes bad over time? The container doesn't have a clear expiration date on it. Should I be concerned about using year-old calcium hardness increaser, or does it stay good indefinitely? I'd rather not waste money buying new chemicals if the old stuff is still effective.…more

Read answer

Water Chemistry Medium 1,076 👍 63

Calcium Hardness Too High But My Fill Water Is Just As Hard

During my last water test, my calcium hardness came back at somewhere around 600 ppm, which I know is way above the recommended range of 200–400 ppm. The frustrating part is that my tap water tests at nearly the same hardness level, so draining and refilling the pool doesn't seem like it would actually help — I'd basically just be starting back at square one with equally hard water. Everything I've read says to partially drain and dilute, but when the numbers on my fill water don't add up to any real improvement, that solution seems pointless.

I'm in a region where hard water is just a fact of life, and I can't find a clear answer on what chemical treatments actually lower calcium hardness directly in the pool. Is there something I'm missing here, or am I stuck just managing the problem rather than fixing it?…more

Read answer

Water Chemistry Medium 45 minutes 178 👍 0

Does My Pool Need Calcium Hardness? Essential Guide

Called the pool store about my new place and they're saying my calcium hardness levels from March's water test are completely out of whack. For the past three years, I've been diligent about testing chlorine, pH, and alkalinity weekly using test strips, but I've never paid attention to calcium hardness levels. My pool store mentioned it during my last water analysis visit in March, but I honestly wasn't sure if it was just an upsell.

Recently, I've noticed some minor scaling around the waterline tiles and my pool cleaner seems to be working harder than usual. The pool is located in Phoenix, Arizona, so we deal with hard water from the tap and intense evaporation during summer months. I top off the water about twice a week during peak season. Should calcium hardness be something I'm actively managing, or is it less critical for fiberglass pools compared to plaster finishes?…more

Read answer

Editor's Pick

Dolphin Nautilus CC Plus Robotic Pool Vacuum (2026)

Wall-climbing scrubber brush and Wi-Fi control — ideal for in-ground pools up to 40 ft. View on Amazon →

Sponsored

Water Chemistry Easy 4 hours 382 👍 0

Can I Swim After Adding Calcium to Pool? Safe Wait Times

Just dumped calcium hardness increaser in the pool and my kids are already begging to swim. The bag says wait but doesn't specify how long, and every website gives a different answer. Water looks crystal clear but I don't want anyone getting skin irritation from undissolved chemicals floating around.…more

Read answer

Water Chemistry Medium 2-4 hours 1,775 👍 0

Do Vinyl Pools Need Calcium? Complete CH Guide 2026

Before our big pool party this Saturday, I'm getting completely contradictory advice about whether my vinyl pool even needs calcium added! I keep reading conflicting info online - some sources say vinyl pools don't need calcium at all, others say they do but at different levels than concrete pools. My test strips show I'm sitting around 100 ppm right now and I'm not sure if that's too low or if I even need to worry about it.

I've been dealing with some metal staining on my vinyl liner and wondering if low calcium could be making it worse by causing corrosion. But I'm also terrified of adding too much and ending up with scaling or that dreaded cloudy water that takes forever to clear up. What's the sweet spot for calcium hardness in vinyl pools, and is it really different from other pool types?…more

Read answer

Water Chemistry Easy 4 hours 456 👍 0

Can I Shock Pool After Adding Calcium? Safe Timing Guide

This is 11 PM and I just dumped calcium into my pool but now realize I need to shock it — can I do both tonight or will I completely wreck my water chemistry?

I just added calcium hardness increaser to bring my levels up, and now I need to shock the pool too. The pool store guy said I need to wait but couldn't give me a straight answer on how long. Can I add the shock right away or do I need to wait between adding these chemicals? I'm trying to get this done in one trip instead of paying them to come back again.…more

Read answer

Water Chemistry Easy 15 minutes 395 👍 1

Does Pool Calcium Expire? Storage & Shelf Life Guide

Found a half-used bag of calcium hardness increaser in my garage from two seasons ago and wondering if it's still good or if I need to buy fresh. Pool supply store wants $25 for a new bag but this one's been sitting in the heat and cold — does pool calcium actually go bad?…more

Read answer

Water Chemistry Easy 2-4 hours 564 👍 0

How Long After Adding Calcium Hardness Can You Swim?

Wondering why my neighbor was swimming hours after adding calcium hardness yesterday while I'm still waiting after adding mine this morning. How long do I need to wait before it's safe to swim? Pool's been circulating for about an hour now. Do I need to test anything else before getting back in?…more

Read answer

Water Chemistry Medium 45 minutes 880 👍 0

Do Fiberglass Pools Need Calcium Hardness? Complete Guide

Pool builder says my new fiberglass shell doesn't need calcium hardness adjustments like a plaster pool does. But the water test shows 150 ppm and the internet says that's too low for any pool. Who's right here — does fiberglass actually need calcium or not?…more

Read answer

Salt Water Medium 30 minutes 298 👍 0

Do Salt Water Pools Need Chemicals? Complete Guide

Our saltwater pool area reeks of that sharp chlorine smell every morning, which seems impossible since we were told these systems are basically chemical-free.

But now I'm reading conflicting information online. The pool store told me I'd still need to buy some chemicals, but I'm confused about what exactly. I thought the salt system was supposed to handle everything? What chemicals do salt water pools actually need, and why? I want to make sure I'm taking proper care of the pool and keeping the water safe for my family.…more

Read answer

Salt Water Medium 30 minutes 275 👍 0

Do Saltwater Pools Need Chemicals? Yes - Here's What You Need

Despite having a 15,000 gallon saltwater pool with a functioning salt system, the pool store keeps pushing $200+ worth of chemicals every month. They keep telling me I need all these pH adjusters, alkalinity boosters, and other expensive stuff on top of the salt. I thought the whole point of going saltwater was to avoid dealing with a bunch of chemicals!

I'm looking to handle this myself and cut down on costs, but I want to make sure I'm not missing something important. Does the salt chlorine generator really only make chlorine? What other chemicals do I actually NEED to keep my water balanced, and what can I skip?…more

Read answer

Product Ranking 8 compared

Best Pool Covers

4.5 (11,300 reviews)

Salt Water Medium 45 minutes 297 👍 0

Do Saltwater Pools Need Calcium? Complete Guide to CH Levels

Tried everything I can think of, but why does my saltwater pool keep destroying my salt cell and corroding my heater elements while making the surface look rough? I've been obsessing over chlorine and pH levels, but maybe I'm missing something obvious?

A friend mentioned calcium hardness might be the culprit, but I honestly have no idea what levels saltwater pools need. I know regular pools need calcium, but does the salt system change things? And if my calcium is off, could that really be why my expensive equipment keeps failing? I'm hoping there's a simple fix here because I'm tired of replacing parts every few months.…more

Read answer

Water Chemistry Medium 45 minutes 741 👍 0

Do Pools Need Calcium? Complete Hardness Level Guide

Noticed my 15,000 gallon inground pool is still etching the plaster walls even though pH and chlorine levels are perfectly balanced. Have a plaster pool and not sure what levels to target. Also curious if vinyl and fiberglass pools need different ranges.

What happens if calcium gets too low? Will it damage my equipment or pool surface?…more

Read answer

Water Chemistry Medium 30 minutes 218 👍 0

Does My Pool Need Calcium? Complete Hardness Guide

Water test came back saying my calcium hardness is at 120 ppm and the pool store guy looked at me like my plaster was about to dissolve. But the pool looks perfectly fine to me — no etching, no rough spots. Does calcium hardness actually matter that much or is this just a way to sell me more chemicals?…more

Read answer

Maintenance Medium 45 minutes 195 👍 0

Pool Chemistry Points System - Water Balance Made Simple

Somewhere between my pool guy insisting I need a full testing kit and six different chemicals, I'm wondering if there's actually a simpler way to balance my water. My neighbor mentioned something about key "points" in pool chemistry that are most important to focus on, but I didn't catch all the details.

What are the main chemistry points I should be tracking to keep my water balanced? I'd love to know the target ranges so I can stop guessing and actually maintain clear, safe water. Right now I'm just winging it and probably making things more complicated than they need to be!…more

Read answer

Loading more Q&A...

You've seen all 154 Q&A articles!