Results for "suction side leak"

Since I'm planning to troubleshoot my pool vacuum this Saturday — should I expect suction-side, pressure-side, and robotic models to need completely different repair approaches? My current setup isn't performing optimally, and I want to diagnose whether the issue stems from suction pressure, mechanical components, or operational methodology.

What are the fundamental working principles behind suction-side, pressure-side, and robotic pool vacuums? I'm particularly interested in the engineering differences between each type and their common failure points. Understanding the mechanics will help me identify whether poor performance is due to inadequate water flow, clogged components, or system-specific malfunctions that require targeted solutions.…more

Noticed my pool water dropped three inches this week at 11 PM tonight — need to figure out if there's a leak before my pool guy arrives tomorrow morning. I mean, I know some water evaporates naturally, especially with this heat, but it seems like more than usual.

Is there like a reliable way to test whether it's just normal evaporation or if there's actually a leak? I don't want to call a pool guy and pay a fortune if it turns out to be nothing, but I also don't want to ignore a real problem.…more

After two weeks of watching my pool devour water at 3/4 inch per day with zero swimmers, I'm convinced there's a serious leak somewhere. My pool is 20,000 gallons, rectangular, and about 8 years old. The water chemistry seems fine - chlorine at 2.5 ppm, pH at 7.4, alkalinity at 110 ppm.

I know pools naturally lose some water to evaporation, especially here in Arizona where it's been hitting 105°F daily. But this seems like a lot more than usual. I've checked around the equipment pad and don't see any obvious puddles or wet spots. The pool company that installed it said minor water loss is normal, but I'm starting to worry this might actually be a leak.

What's the normal amount of water loss I should expect from evaporation alone? At what point should I be concerned that this is actually a structural leak rather than just normal evaporation? I want to catch any potential problems before they get worse and more expensive to fix.…more

Found the pump basket completely packed with air again this morning when I went out to check on the pool — same thing that happened yesterday, and the day before that. Once I manually fill the housing with water and get it going, the pump runs beautifully all day with no issues at all. But the second I shut it off for the night and try to fire it back up, it just churns away with a basket full of air and refuses to catch on its own.

This has become a frustrating daily ritual. I have a standard above-ground setup and the pump is maybe three or four years old. Water level in the pool looks fine, and I haven't noticed any obvious drips or wet spots around the equipment pad. I'm not sure if this is a seal issue, something with a valve, or just normal wear and tear at this point.

Is there a way to track down exactly where the air is sneaking in? I'd love to fix this myself if it's something manageable, or at least know what I'm dealing with before calling someone out.…more

During the estimate call, my pool guy quoted me close to $200 to cut out and re-plumb a leaking glued PVC joint right at my pump — and honestly that feels steep for what looks like a tiny weeping drip. I picked up a stick of J-B Weld WaterWeld (the 8277 epoxy putty) at Home Depot for about nine bucks, and I'm wondering if I can just knead it up and pack it around that joint myself instead of paying someone else to do it.

My main questions are: will this stuff actually hold against the water pressure a pool pump puts out, and do I need to completely shut the system down and dry the pipe before applying it? I know it says 'cures underwater' on the package, but I want to make sure I'm not just wasting my time with a fix that'll blow off the minute I fire the pump back up.

Is this a real repair I can count on, or am I just buying myself a little time before I have to do the full re-glue job anyway? Happy to do the proper fix eventually, but if this buys me a season I'm all for it.…more

My pool pump has been running louder than usual lately, and I'm starting to wonder if I actually understand how this thing works. Ever since we had that power outage last month, the pump seems to be working harder but the water circulation doesn't look quite right. I can see water moving through the return jets, but I'm not really sure what's happening inside the pump itself or how it's supposed to move all that water through the filter system. Is there a simple way to understand the mechanics so I can better troubleshoot when something goes wrong?…more

I keep seeing pool terms and abbreviations like SLAM, CYA, FC, PSI, sanitizer, backwash, and shock. What do they mean in plain English?…more

This 4-year-old pool pump is turning my once-crystal-clear water cloudy and stagnant — is it worth repairing or should I just replace the whole thing? I'm not super technical when it comes to pool equipment, so I'm not sure what warning signs I should be watching for.

What are the telltale signs that indicate my pump isn't doing its job properly? I want to catch any problems before they turn into expensive repairs or leave me with a swamp instead of a swimming pool!…more

Found out from my wife that our pool filter pressure gauge has been stuck at a weirdly low 6-7 PSI all week and now I can't stop obsessing over it. My 20,000 gallon inground pool has been running fine otherwise, but I'm wondering if this low pressure is something I should be concerned about.

I've heard people talk about high filter pressure being bad, but nobody ever mentions if pressure can be too low. The pump seems to be running, but I'm not sure if the water flow looks as strong as it used to be. Water chemistry has been balanced - chlorine at 2.5 ppm, pH at 7.4, and alkalinity at 110 ppm. Should I be worried about this low pressure reading, and what could be causing it?…more

My pool pump started making a grinding noise yesterday and the water flow through the skimmer has slowed to almost nothing — and we're hosting a big backyard pool party this Saturday. The filter pressure is reading lower than normal, which I've read can mean a clogged impeller. I pulled out the strainer basket and it had some debris in it, but even after cleaning it out the flow is still weak.

I'm pretty handy and would love to tackle this myself if it's doable without a pro. Can anyone walk me through how to actually get into the impeller and clear it out safely? I want to make sure I don't damage anything in the process — and I definitely need the pump running properly before the weekend.…more