Pool water chemistry involves maintaining proper levels of chlorine (1-3ppm based on CYA), pH (7.4-7.6), alkalinity (60-120ppm), and calcium hardness (250-350ppm for plaster). Regular testing with quality kits and proper chemical dosing ensures safe, clear water.
The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Most Las Vegas pools operate year-round due to the desert climate, with peak season from May through October. Many commercial pools and resorts stay open 24/7 during peak months, while residential pools typically benefit from heating systems November through March.
Wait 24-48 hours after shocking your pool before adding algaecide, allowing chlorine levels to drop below 5 ppm. Test your water first to ensure proper chemical balance and maximum algaecide effectiveness.
Orlando pools in April typically reach 75-78°F naturally, which most people find comfortable for swimming. Pool heating is generally not necessary unless you prefer water temperatures above 82°F.
Pool opening involves removing winter covers, inspecting equipment, reconnecting plumbing, and balancing water chemistry. Start with equipment inspection, fill and reconnect systems, then shock and balance chemicals before swimming.
Pool leaks can occur in the shell, plumbing, or equipment and are detected using bucket tests, dye tests, and pressure testing. Most minor leaks can be DIY repaired, but structural damage requires professional assessment.
Pool winterization involves balancing chemicals, protecting equipment, and proper closing procedures. The process varies by climate zone but typically includes shocking, lowering water levels, and winterizing plumbing to prevent freeze damage.
Yes, most pool owners need pH Up and pH Down chemicals to maintain the ideal pH range of 7.4-7.6, but you may not need both products depending on your water's natural tendencies.
Pool heaters can fail due to electrical issues, gas problems, water flow restrictions, or component failures. Most common issues like pilot light problems, low water flow, and thermostat malfunctions can be diagnosed and often fixed without professional help.
Salt water pools use electrolysis to generate chlorine from dissolved salt, requiring proper water chemistry balance including pH, alkalinity, and CYA levels. They still need regular maintenance and chemical adjustments despite producing their own chlorine.
Pool pumps require regular maintenance and troubleshooting to operate efficiently. Common issues include low water flow, unusual noises, and electrical problems that can often be resolved with proper diagnosis and maintenance.
Most pools don't need algaecide if you maintain proper chlorine levels (2-5ppm FC) and adequate CYA (30-50ppm). Algaecide is mainly useful for prevention during high-risk periods or as backup insurance, not for treating active algae blooms.
Whether you need to winterize your pool depends on your climate zone. Areas with freezing temperatures require full winterization, while warmer regions need only reduced maintenance and chemical adjustments.
To raise pool pH, add sodium carbonate (soda ash) for quick increases or sodium bicarbonate (baking soda) for gradual increases. Test first, calculate dosage based on pool size, and add chemicals slowly with circulation running.
