The SLAM method (Shock Level And Maintain) clears green pools by maintaining high chlorine levels continuously until water clears. Use liquid chlorine to reach shock level based on CYA, maintain 24/7 until overnight chlorine loss is 1ppm or less.
Above ground pools require proper installation on level ground, regular liner maintenance (lasting 6-10 years), and balanced water chemistry with chlorine levels based on CYA. This comprehensive guide covers everything from DIY installation to winterization and troubleshooting common issues.
Pool opening involves removing winter covers, inspecting equipment, reconnecting plumbing, and balancing water chemistry. Start with equipment inspection, fill and reconnect systems, then shock and balance chemicals before swimming.
Pool leaks can occur in the shell, plumbing, or equipment and are detected using bucket tests, dye tests, and pressure testing. Most minor leaks can be DIY repaired, but structural damage requires professional assessment.
Pool winterization involves balancing chemicals, protecting equipment, and proper closing procedures. The process varies by climate zone but typically includes shocking, lowering water levels, and winterizing plumbing to prevent freeze damage.
A properly winterized pool can stay closed for 6-8 months safely, while emergency closures should be limited to 2-4 weeks maximum. Beyond these timeframes, water chemistry deterioration and equipment damage risks increase significantly.
Above ground pools typically range from 48 to 54 inches deep, with 52 inches being the most popular choice. The depth you choose depends on your family's swimming needs and safety requirements.
Above ground pool installation requires proper site preparation, level ground, and careful assembly of walls, liner, and equipment. Most installations take 6-12 hours with proper planning and tools.
Most pools don't need phosphate remover if you maintain proper chlorine levels. Only consider phosphate removal if you have persistent algae problems despite balanced water chemistry and proper sanitizer levels.
To lower pool pH, add muriatic acid (liquid) or sodium bisulfate (dry acid) to your pool water. Use 1 quart of muriatic acid per 10,000 gallons to lower pH by 0.2 units, testing and adjusting gradually.
Yes, above ground pools absolutely need a liner to hold water and protect the pool structure. The liner creates a waterproof barrier and should be replaced every 5-9 years depending on usage and maintenance.
Yes, diatomaceous earth (DE) pool filters require regular backwashing, typically every 4-6 weeks or when the pressure gauge reads 8-10 PSI above the clean starting pressure. After backwashing, you must add fresh DE powder to recharge the filter.
Inground pool costs range from $35,000-$100,000+ depending on size, materials, and features. Concrete pools are most expensive ($50,000-$100,000), vinyl liner pools are mid-range ($35,000-$65,000), and fiberglass pools fall in between ($40,000-$85,000).
Used pool filter sand can be used in gardens after thorough cleaning and testing, but it may contain chlorine residue and accumulated contaminants that could affect plant growth.
You can close a green pool, but it's not recommended as algae will worsen over winter. Either treat the algae with SLAM method before closing, or use extra winterizing chemicals and accept potential spring cleanup issues.
